Operating instructions

Vidscope-HD User Manual
Manual vidscope-hd v2.doc
38
6.9 Multi-Mode Display
Vidscope-HD+ has the ability to display up to 6 separate waveform
windows at once. This mode is switched from the normal single mode by
the Multi button found either on the waveform menu or the setups menu.
When in Multi mode you can either have a default set of window modes
or switch to the User mode, where you can select any arrangement of
the six windows you choose. Multi-mode is automatically selected if the
main application window: Options >> Integrate Vidscope windows is
clicked. This puts the whole display into the one window with the
multiple panes.
Multi –Mode Default
The six windows are identified by pane numbers 1,2,3 on the top row
and 4, 5 and 6 on the bottom row. In default multi mode the control
menus automatically linked to the default panes.
PANE 1 PANE 2 PANE 3
Always a picture
monitor
Always audio level
bars
Any selected audio
display default to
audio vectors
PANE 4 PANE 5 PANE 6
Always Luminance
waveform (wfm)
Always vectorscope
default 75% cal
Can be set by user to
either histogram,
component RGB
parade or gamut
Multi – User Mode
The first time user is selected , the six windows may very well be blank
or in random displays. To set any window, left click on it – the pane
number will appear in the title of the control menu. Then select the
display mode required using any video or audio control menu. Do this in
turn for each pane required. Move the pane vertical and horizontal
dividers to arrange the relative geometry for optimum clarity.
If you left click on any display window, the menu will change to the
current mode for that window for convenient change. In user mode it is
recommended that the settings are saved as User Presets for later
recall. These are found either in the setups menu or displayed in the
main application window once Options >> Show Presets is selected.
Double left clicking a window will zoom up that display to single display
mode, cancelling multi-mode. Double clicking again, restores multi-user
mode. If the Show Title option is checked in the setup menu, the bar
highlights when selected.
The setups menu has a set of buttons for Multi and user mode. These
reveal some additional controls to clear the panes or set default positions
which are self-evident.
If you left click on any display window, the menu will
change to the current mode for that window for convenient
change.
Double left clicking a window will zoom up that display to
single display mode, cancelling multi-mode. Double
clicking again, restores multi-mode.
Saving a Multi
-
mode set
1. Setup the display set you want in user mode
2. Find the Save Preset
button at the bottom of the
button stack
3. Click this once to change message to Clcik
Preset Button
4. Click the preset button to save into
5. Enter your descriptive text for your arrangement
so as to fit the example button shown in the
save menu..
6. Click OK in the save preset box.