Operating instructions
Vidscope-HD User Manual
Manual vidscope-hd v2.doc
36
6.6 Setups Menu
This configures the screen layout, the waveform snapshot parameters
and user presets etc.
Screen Layout
The main windows used in Vidscope are all floating – you can put them
where you like on the desktop.
The )# option buttons allow the windows to be restored to
regular positions.
%+<)$& sets a large preview monitor size and fits
the waveform window in what ever space if left to it right. The control
panel is always repositioned below the waveform window if possible.
+<$& sets a both the preview monitor window and the
waveform window widths to half the full desktop screen width and
displays these windows side-by-side at the top of the desktop. This may
compromise picture quality in the preview monitor due to scaling. The
control panel is always repositioned below the waveform window if
possible.
+4+=)> restores the display that you last set
manually.
+,)4 sets positions as specifically saved using the
)4-)# button
! ensures that the current layout is
restored the next time Vidscope is booted-up.
"4&
Advanced mode, when checked, turns on the line selector
facilities, logging menu and full snapshot facilities.
Freeze Display
The freeze button stops both the waveform and preview monitor displays
whilst other functions, including capturing continue normally. Pressing
Ctrl+f on the keyboard operates freeze from any menu.
Source Menu
This reveals the preview monitor window on the desktop if it has been
minimized or “lost” under something else.
If you lose, hide or kill the Control Panel window itself, if can be revealed
by right clicking on the waveform display window.
Note: If the Vidscope Control Panel window ever gets left unnecessarily
on the desktop , it can be closed by the keyboard command: Ctrl + Z.