Operating instructions
Vidscope-HD User Manual
Manual vidscope-hd v2.doc
24
4.2 Summary of Display Modes
WFM – waveform
Standard Luminance waveform display either 1H All lines superimposed,
1 Field (interlaced mode) or 1 Frame across the X-axis. With the line
selector on (advanced mode), then any range of individual lines can be
displayed 1 – 150H and the starting line position varied.
To vary the gain and baseline offset, go to the -"#menu and click the
+ button.
Line Selection
(Advanced Mode Only)
When the waveform display mode is set for Frame or Field, the #
)option allows a range of lines to be selected and displayed from
any part of the picture. This is only available in pro versions when the
"4 option is checked in the ) menu
Vertical start line position is set either by the Line Selector slider, the line
number box or the up/down blue arrows.
The horizontal scale from 1H to 150H selects how many lines are
displayed or 1 whole field or Frame.
Using the 9 button allows zooming in on a narrow range of a
single (1H) line. Expansion only operates when 1 H Scale selected.
Use WFM first
when selecting
lines, then any other display
mode shows just the line range
selected
A Vmode option needs to
be selected before Line
Select will operate
In interlaced mode, line numbering is according to
PAL/NTSC standard and in field order and displays in
that order.
In +14, line numbering begins at 1, field
1 and 2 (odd/even) are meaningless, only Frame
applies.