Specifications
Radius
HD
4
Introduction
Congratulations and thank you for your purchase of the Radius
HD
loudspeakers. We are
confident they will provide years of enjoyment and pleasure as only high quality components
have been used throughout.
Building on the overwhelming success of the original Radius Series, Radius
HD
brings
redesigned cabinet profiles, enhanced cabinet structure, improved aesthetics and improved
sonic balance and response.
The R270
HD
has received major performance enhancements in every area. We have
increased the cabinet volume, added an additional rear firing port and also added ballast
in the bottom of the cabinet. All of these new features combined to offer improved, tighter,
punchier bass response and extra cabinet stability.
The R45
HD
and R90
HD
come supplied with a wall fixing bracket. This enable upto 18 degrees
of movement in all directions.
We have also introduced a new product to the Radius
HD
Series, the R one
HD
. The R one
HD
is a left, centre, right in one cabinet. Each channel is enhanced with it’s own braced
compartment and individually specified crossovers. Designed to fit below/ above your
TV where the centre channel would normally sit, additional left and right speakers are not
needed as the R one
HD
houses all three in one.
Please follow this user manual carefully as it contains important information about positioning
and set up procedures. For further advanced information on system set-up, FAQ’s and
multi-lingual support please refer to our web site at: www.monitoraudio.co.uk
The R45
HD
has a thermal protection device in it. This helps to protect the drive unit
and tweeter from permanent damage. If the speaker stops working after a long
period of play, turn off the source for about 10 minutes, and retry.