Specifications

OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
Specifications
OI Touchscreens
52
www.IDEC.com
Interface Specifications
Model 5.7” HG2G-5ST22TF / HG2G-5ST22VF (Color)
Serial
Interface
1
Electrical Characteristics RS232/RS485/RS422
Connector Detachable 9-pin terminal block
Ethernet
Interface
(LAN)
Interface IEEE802.3 (10/100BASE-T) compliant
Connector Connector (RJ-45)
USB
Interface
Interface USB 2.0
Connector USB Type Mini-B connector (Note)
Interface Specifications, con’t
Model 5.7” HG2G-5ST22TF / HG2G-5ST22VF
O/I Link
Interface
Electrical Characteristics EIA RS485 compliant
Connector 3-pin terminal block
1. The backlight life refers to the time until the brightness reduces by half after use at 25°C.
2. Brightness of the LCD only.
Display Specifications
Model 5.7” HG2G-SB (Monochrome)
Display STN monochrome LCD
Color/Shade 15 shades
Effective Display Area 115.2W × 86.4H mm
Display Resolution 320W × 240H pixels
View Angle Right and left 45°, up 25°, down 45°
Contrast Adjustment Adjustable from the front of the panel
Backlight CCFL
Backlight Life 75,000 hours minimum
1
Backlight Control Automatic off
Brightness 500 cd/m
2 2
Brightness Adjustment 32 levels
Backlight Replacement Not possible
1. The backlight life refers to the time until the brightness reduces by half after use at 25°C.
2. Brightness of the LCD only.
General Specifications
Model
5.7” HG2G-SB (Monochrome)
24V DC 12V DC
Rated Power Voltage 24V DC 12V DC
Power Voltage Range 20.4 to 28.8V DC 10.2 to 18.0V DC
Power Consumption 10W maximum
Allowable Momentary
Power Interruption
10 ms maximum
Inrush Current 20A maximum 40A maximum
Dielectric Strength 1,000V AC, 10 mA, 1 minute between power and FG terminals
Insulation Resistance
50 MΩ minimum between power and FG terminals (500 V DC
megger)
Operating Temperature 0 to +50°C (no freezing)
Operating Humidity 10 to 90% RH (no condensation)
Storage Temperature −20 to +60°C (no freezing)
Storage Humidity 10 to 90% RH (no condensation)
Pollution Degree 2
Vibration Resistance
5 to 8.4 Hz amplitude 3.5 mm,
8.4 to 150 Hz, acceleration 9.8 m/s
2
10 cycles (100 minutes) on each of three mutually perpendicu-
lar axes
Shock Resistance
147 m/s
2
, 11 ms
5 shocks on each of three mutually perpendicular axes
General Specifications, con’t
Model
HG2G-SB (monochrome)
24V DC 12V DC
Noise Immunity
Fast transient/burst test,
Power terminals: ±2 kV,
Communication line: ±1 kV (IEC/EN61000-4-4)
Electrostatic Discharge
ESD-3 (RH-1)
Level 3 (Contact ±6 kV, air ±8 kV) (IEC/EN61000-4-2)
Corrosion Immunity Free from corrosive gases
Mounting Panel mounting
Degree of Protection IP65 (IEC 60529) (front part when mounted )
1
, Type 13
2
Dimensions 167.2W ×134.7H ×40.9D mm
Weight (approx.) 0.5 kg
Do not use the HG2G in an environment subject to strong ultraviolet rays, otherwise the LCD
quality will deteriorate.
1. Protection degree of the front surface after mounting. Operation not guaranteed under
certain environments.
2. Operation not guaranteed when used with certain types of oils.
Operation Specifications
Model 5.7” HG2G-SB (Monochrome)
Switching Element Analog resistive membrane
Operating Force 0.2 to 0.8N
Mechanical Life 1,000,000 operations
Acknowledgement Sound Electronic buzzer
Function Specifications
Model HG2G-5SB (monochrome)
Screen Types Base screen, popup screen, system screen
No. of Screens
Base screen: 3,000 max.
Popup screen: 3,015 max.
User Memory 2 MB (including expansion fonts)
Parts
Bit Button, Word Button, Goto Screen, Key Button, Multi Button,
Keypad, Selector Switch, Potentiometer, Numerical Input, Charac-
ter Input, Pilot Lamp, Multi-State Lamp, Picture Display, Message
Display, Message Switching Display, Alarm List Display, Alarm Log
Display, Numerical Display, Bar Graph, Trend Chart, Pie Chart, Meter,
Calendar, Bit Write Command, Word Write Command, Goto Screen
Command, Timer, Screen Script Command, Multi Command
Calendar
Year, Month, Day, Hour, Min., Sec., Day of Week
±60 sec per month (at 25 °C)
Power Failure
Backup Data
Calendar, log data, keep internal relay, keep internal register
Battery Recommended replacement span: every 4 years (at 25°C)