Specifications

47
800-262-IDEC (4332) • USA & Canada
Accessories
OI Touchscreens
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
Accessories, con’t
Applicable Models
12.1” 8.4” & 10.4” 5.7” 4.6”
Item Part Number Description HG4G-CJT22MF HG3G-8JT/AJT HG2G-5FT HG2G-5ST HG2G-SB HG1F
Converters
HG9Z-GWDF1DH485-4
AB SLC500 (w/RJ45 connector)DF1 / DH485 Com-
munication Pakg for 4.6” HG1F
– – – – –

HG9Z-GWDF1DH485-5
AB SLC500 (w/RJ45 connector)DF1 / DH485 Com-
munication Pakg for HG2G/HG3G/HG4G
    
–
1. The protective sheet is UV resistant, however, resistance against direct sunlight in outdoor usage is not guaranteed.
2. Use the expansion module clamp when using expansion modules.
Order the module clamp by referring to the width of the module shown in the dimensions of each module.
Note: When connecting more than 3 expansion modules to the HG3G/4G, note the limits shown below:
-Current flow rate at 5V: 130 mA max. Total width: 92.3 mm max.
-Current flow rate at 24V: 150 mA max.
Expansion Modules (Applicable for 12.1” HG4G, 8.4” & 10.4” HG3G, and 5.7” HG2G-5FT22TF)
Input Type
Part No.
(Ordering No.)
Connector
Dimensions
(L × W × H mm)
Consumption
Current (mA)
5V 24V
Input Modules
8 points/AC Input FC4A-N08A11
Removable Terminal Block
90.0 × 23.5 × 70.0 25 0
8 points/DC Input FC4A-N08B1 90.0 × 23.5 × 70.0 25 0
16 points/DC Input FC4A-N16B1 90.0 × 23.5 × 70.0 40 0
16 points/DC Input FC4A-N16B3
MIL Connector
90.0 × 17.6 × 70.0 35 0
32 points/DC Input FC4A-N32B3 90.0 × 29.7 × 70.0 65 0
Output Modules
8 points/Relay Output FC4A-R081
Removable Terminal Block
90.0 × 23.5 × 70.0 30 40
16 points/Relay Output FC4A-R161 90.0 × 23.5 × 70.0 45 75
8 points/Transistor Sink Output FC4A-T08K1 90.0 × 23.5 × 70.0 10 20
8 points/Transistor Source Output FC4A-T08S1 90.0 × 23.5 × 70.0 10 20
16 points/Transistor Sink Output FC4A-T16K3
MIL Connector
90.0 × 17.6 × 70.0 10 40
16 points/Transistor Source Output FC4A-T16S3 90.0 × 17.6 × 70.0 10 40
32 points/Transistor Sink Output FC4A-T32K3 90.0 × 29.7 × 70.0 20 70
32 points/Transistor Source Output FC4A-T32S3 90.0 × 29.7 × 70.0 20 70
Mixed I/O
Modules
4 points/DC Input
4 points/Relay Output
FC4A-M08BR1 Removable Terminal Block 90.0 × 23.5 × 70.0 25 20
16 points/DC Input
8 points/Relay Output
FC4A-M24BR2 Non-removable Terminal Block 90.0 × 39.1 × 70.0 65 45
1. Use the expansion module bracket when using expansion modules.
2. Order the module bracket (S), (L) or (XL) by referring to the width of the module shown in the dimensions of each module.
3. When connecting more than 3 expansion modules to HG3G/4G, note the limits shown below:
Limits
Current flow rate at 5V: 130mAmax.
Total width: 92.3mmmax.
Current flow rate at 24V: 150mAmax.
4. See instruction manual for details on MicroSmart expansion modules.