Specifications

OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
Accessories
OI Touchscreens
46
www.IDEC.com
Accessories
Applicable Models
12.1” 8.4” & 10.4” 5.7” 4.6”
Item Part Number Description HG4G-CJT22MF HG3G-8JT/AJT HG2G-5FT HG2G-5ST HG2G-SB HG1F
Programming
Tools
SW1A-W1C
Automation Organizer (includes WiindLDR,
WindOI-NV2, & WindCFG Programming Software)
     
HG9Z-XCM2A USB Programming Cable USB-miniB (2m)
   
– –
HG9Z-XCM1A
Cable connecting PC to Touchscreen via RS-232
Serial Port
– – – –
 
FC4A-USB
USB to RS-232 Converter for PCs without Serial
Ports
– – – –
 
Mounting Clips
SLD-K02
Replacement clips (min. 10 pcs) (4 pcs are supplied
with HMI)
– –
   
HG9Z-4K2
Replacement clips (min. 10 pcs) (4 pcs are supplied
with HMI)
 
– – – –
Host
Communication
Plug
HG9Z-XT09V
Replacement terminal block plug. (1 is supplied
with HMI)
– –
 
– –
HG9Z-XT09
Replacement terminal block plug. (1 is supplied
with HMI)
 
– –

–
Replacement
Battery
HG9Z-XR1
Lithium battery CR2032 (one battery is supplied
with HMI)
     
USB Cable Lock
Pin
HG9Z-XU1 Used to lock USB cable (for USB2)
  
– – –
USB panel-
mount
extension cable
HG9Z-XCE11 For USB-A port (1m)
  
– – –
HG9Z-XCE21 For USB-mini B PORT (1m)
   
– –
Memory Card HG9Z-XMS2 SD Memory Card (2GB)
  
– – –
Protective
Cover
HG9Z-2E2
Use with 5.7” HMI. Covers entire front of HMI.
(min. 3 pcs.)
– –
  
–
Protective
Sheet
1
HG9Z-2D5
Use with 5.7” HMI. Sheet lays over LCD area.
(min.5 pcs.)
– –
  
–
HG9Z-3D8
Use with 8.4” HMI. Sheet lays over LCD area.
(min.2pcs.)
–

– – – –
HG9Z-3DA2
Use with 10.4” HMI. Sheet lays over LCD area.
(min. 2pcs.)
–

– – – –
HG9Z-4DC
Use with 12.1” HMI. Sheet lays over LCD area.
(min. 2pcs.)

– – – – –
HG9Z-1D
Use with 4.6” HMI. Sheet lays over LCD area
(min.5 pcs)
– – – – –

Expansion
Module Clamp
2
HG9Z-XJ3
Short type for installing expansion I/O modules
(Total width 17.6 to 41.1mm)
  
– – –
HG9Z-XJ4
Long type for installing expansion I/O modules
(Total width 47 to 68.8 mm)
  
– – –
HG9Z-XJ5
Extra-Long type for installing expansion I/O mod-
ules (Total width 70.1 to 93.9 mm)
  
– – –
L-shaped
Terminal Block
Connector for
I/O Module
HG9Z-PMT10L For 10 pole MicroSmart I/O Module (min. 2 pcs)
  
– – –
HG9Z-PMT11L For 11 pole MicroSmart I/O Module (min. 2 pcs)
  
– – –
Replacement
Backlight
HG9Z-1FB Replacement backlight for 4.6” HG1F – – – – –

O/I Link Unit HG9Z-2G1 Communication module for O/I Link mode – – –
  
Panel Mount
Adaptor
HG9Z-2A1
Adaptor for mounting HG2G to the panel cut-out
of HG2F
– –
  
–
HG9Z-2A2
Adaptor for mounting HG2G to 156 x 123.5 mm
panel cut-out (other mfr.)
– –
  
–
Accessories continued next page.