Instruction manual
Table Of Contents
- Introduction
- Your Bronze BR-FX
- Fixing Your Bronze BR-FX to a Wall
- Connecting your Bronze BR-FX
- Positioning
- Try varying the distance your loudspeakers are apart from each other. If they are too close together, this may result in poor stereo imaging. This is when sound moves from left to right or right to left, for example a car in a movie sound track. But if you place them too far apart, there will be a big gap in the imaging. When listening to music through your speakers, if you have them set up correctly, you shouldn’t notice that the speakers are even there, the music should sound as if it is coming from the centre of the two speakers.
- Running-In
- Port Bungs
- Bookshelf Loudspeakers
- Floor-Standing Loudspeakers
- Foam port bungs are supplied for all speakers with and ATR port tube. The port bungs are another way of fine-tuning the loudspeaker to fit in sonically in your home environment.
- Guarantee and Service
Your Bronze BR5
BR5 is new to the Bronze Reference Series. The cabinet profile is now slimmer
than its predecessor to offer a more desirable foot print for a typical life-style
setting. The new 5.5” bass drivers replace the 6.5” bass drivers of the B4.
However, bass extension and punch have been maintained and even improved
in terms of overall control. The 2 ½ way design is now optimised with the bass
and bass/ mid-range drivers working in dual chambers, similar to the more
advanced MA designs. Cabinet bracing has been up rated and results in very
rigid construction producing a clean, ‘un boxy’ character. The floor-level
mounted terminal panel now allows easy access without un-necessary trailing
cables.
Unlike the BR2, the BR5 has a reflex port at the rear as well as the front. This is
to provide maximum airflow at low frequencies and reduces air pressure that
can lead to bass compression effects.
Frequency
Response
Sensitivity
(1W@1m)
Nominal Impedance
(Ohms)
Power
Handling
RMS (W)
Recommended
Amplifier Power
Output.
36Hz-30KHz 90dB 6 120 30 - 120W
Drive Unit
Complement
Cabinet
Design
Product External
Dimensions
cm (inch)
Weight
(packed)
Kg (lb)
Finishes
1 x 5.5" MMP
®
Mk2
Bass, 1 x 5.5" MMP
®
Mk2 Bass mid-range.
1 x 25mm Gold Dome
C-CAM
®
tweeter.
Dual Chamber
Bass Reflex.
Ported Front
and Rear.
85H x 16.5W x 24.7D
(33
7
/
16
x 6 ½ x 9 ¼ )
14 (30.8)
(Packed
Individually)
Black Oak,
Walnut, Cherry.
6
Rev4. © Monitor Audio 2006