Instruction manual
Table Of Contents
- Introduction
- Your Bronze BR-FX
- Fixing Your Bronze BR-FX to a Wall
- Connecting your Bronze BR-FX
- Positioning
- Try varying the distance your loudspeakers are apart from each other. If they are too close together, this may result in poor stereo imaging. This is when sound moves from left to right or right to left, for example a car in a movie sound track. But if you place them too far apart, there will be a big gap in the imaging. When listening to music through your speakers, if you have them set up correctly, you shouldn’t notice that the speakers are even there, the music should sound as if it is coming from the centre of the two speakers.
- Running-In
- Port Bungs
- Bookshelf Loudspeakers
- Floor-Standing Loudspeakers
- Foam port bungs are supplied for all speakers with and ATR port tube. The port bungs are another way of fine-tuning the loudspeaker to fit in sonically in your home environment.
- Guarantee and Service
Fixing Your Bronze BR-FX to a Wall
WARNING: For safety reasons do not attempt to fix these speakers
to your wall if you are unsure of your ability to provide a secure and
safe fixing. You will need to determine where the BR-FX will be fixed
and the structure of the wall. If unsure, please obtain the services of a
competent qualified tradesperson.
Ensure that there are no water pipes, or electricity cables running behind where
the wall bracket is going to be secured. Work from secure steps and avoid
trailing wires. For recommendations on where to fix your BR-FX please refer to
the FAQ’s on our web site: www.monitoraudio.co.uk
220mm42mm
63mm
295mm
290mm
11
Rev4. © Monitor Audio 2006