Instruction manual
Table Of Contents
- Introduction
- Your Bronze BR-FX
- Fixing Your Bronze BR-FX to a Wall
- Connecting your Bronze BR-FX
- Positioning
- Try varying the distance your loudspeakers are apart from each other. If they are too close together, this may result in poor stereo imaging. This is when sound moves from left to right or right to left, for example a car in a movie sound track. But if you place them too far apart, there will be a big gap in the imaging. When listening to music through your speakers, if you have them set up correctly, you shouldn’t notice that the speakers are even there, the music should sound as if it is coming from the centre of the two speakers.
- Running-In
- Port Bungs
- Bookshelf Loudspeakers
- Floor-Standing Loudspeakers
- Foam port bungs are supplied for all speakers with and ATR port tube. The port bungs are another way of fine-tuning the loudspeaker to fit in sonically in your home environment.
- Guarantee and Service

Your Bronze BR-FX
The BR-FX surround speaker combines amazing performance with modern,
discreet design that can be flush mounted on a wall using the enclosed wall
brackets. The attractive curved grille and end caps conceal a rigid angular
cabinet construction and Monitor Audio’s renowned and highly acclaimed
MMP
®
Mk2 driver technology and C-CAM
®
tweeters.
By using low slope linear phase crossover design, Monitor Audio has
engineered the Bronze BR-FX to have seamless integration and almost perfect
180-degree dispersion characteristics. Whilst the bass driver always operates
in phase, the tweeter section can be configured to operate as a bi-pole or di-
pole. This is adjusted by way of a toggle switch (see page 11). To enable the
correct function of these speakers, they are left and right handed specific.
Frequency
Response
Sensitivity
(1W@1m)
Nominal Impedance
(Ohms)
Power
Handling
RMS (W)
Recommended
Amplifier Power
Output.
65 Hz - 30 KHz 88 dB 6 80 25-80W
Drive Unit
Complement
Cabinet
Design
Product External
Dimensions
cm (inch)
Weight
(packed)
Kg (lb)
Finishes
1 x 5.5” MMP
®
Mk2
bass/midrange driver,
2 x 25mm Gold dome
C-CAM
®
tweeters.
Sealed
Cabinet
29.5H x 29W x 13D
(11
5
/
8
x 11
7
/
16
x 5
1
/
8
)
8 (17.6)
Black Oak,
Walnut, Cherry,
10
Rev4. © Monitor Audio 2006