Owner's Manual

monitoraudio.com 5
Specification
Monitor Audio reserves the right to alter specifications without notice.
Bronze W10 Subwoofer
System Format
Long-throw 10” driver featuring ‘dished’ C-CAM cone.
10” flat panel ABR (auxiliary bass radiator).
18 mm M.D.F. internally braced construction
Lower Frequency Limit
-3 dB @ 33 Hz / -10 dB @ 28 Hz (Free Field)
Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In Room)
Upper Frequency Limit
-6 dB @ 150 Hz
Drive Unit Complement
1 x 10” C-CAM subwoofer driver featuring a 2" long throw voice coil
Linear Driver Excursion
17 mm peak to peak
Amplifier Output
220 W
Amplifier Classification
Class D with high current Switch mode power supply (SMPSU)
Phase Control
0 Degrees & 180 Degree pure Invert
Low Pass Filter Alignment
2nd order (12 dB/ Octave), from 40 Hz to 120 Hz
Equalisation DSP
3 pre-set modes: Music, Movie, Impact
Auto Sensing
Line Level >3mV. Auto Standby feature after 20 mins
Audio Inputs
LFE unbalanced input RCA
Stereo unbalanced inputs RCA
Input Impedance
20 kOhms input impedance
12v Trigger
3.5 mm mono mini-jack. 6 V threshold
Electrical Certifications
CE / CB/ ETL / Fcc/ CCC/ ErP (Energy saving compliant)
Mains Input Voltage
100 – 120 Vac ~60Hz / 220 – 240 Vac ~50/60 Hz
(Manually selected)
Power Consumption
Maximum 300 W, Standby <0.5 W (ErP compliance)
Fuse Type
20 mm T4AL 250 VAC
External Dimensions
(Including Drivers, Amp &
Terminals (H x W x D)
321 x 321 x 364 mm
12
5/8
x 12
5/8
x 14
5/16
"
External Dimensions
(Including Grille, Amp & Feet)
(H x W x D)
366.5 x 321 x 364 mm
14
7/16
x 12
5/8
x 14
5/16
"
Weight (Unpacked)
13.4 kg (29 lb 9 oz)