User manual
Freeing Your Music
Connecting to a WiFi Network.
There are a couple of dierent ways you can register the A100
onto the WiFi network. One method connects the phone directly to
the A100 using the Apple supplied USB lead, while the second uses
the A100’s web portal via a PC, Mac or iOS-device.
What is required?
To connect the A100 to a WiFi network you will need to have the
following:
• A Wireless router.
• For Option 1, either an iPod Touch or iPhone and the Apple
supplied USB lead.
• For option 2, either a PC, Mac, iPod Touch, iPhone or iPad
connected wirelessly to the network. The PC/ Mac must be
connected wirelessly.
• Airstream A100
Option 1.
This is the easiest of the two processes. It uses the wireless
network security information stored on the iOS-device to connect
to and gain access to the network. All you need is a compatible
iPod Touch or iPhone running iOS5 or above.
A list of compatible devices for this method of connection can be
found below:
• iPhone 5
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPod Touch 5th Generation
• iPod Touch 4th Generation
• iPod Touch 3rd Generation
• iPod Touch 2nd Generation
1. Turn the A100 on from standby mode. The LED on the front
will ash blue, rstly in pattern 2 then pattern 1 sequence.
2. When it changes to Pattern 1 (not connected to a wireless
network), open the cover over the USB socket on the A100 and
connect the USB lead to the A100 and your iOS-device.
3. On the A100, press the Sharing Button (Item 3 on page 3)
6