Installation Guide 200 Series ®
Installation guide 200 Series The 200 Series models utilise C-CAM® bass drivers and a higher spec version of the C-CAM® gold dome tweeter. These models offer higher grade performance, and greater flexibility. The renowned C-CAM® (Ceramic Coated Aluminium Magnesium alloy) cone maximises the potential of the driver mechanism. C-CAM® is an innovative alloy material that exhibits ideal mechanical properties for use in high performance loudspeaker cones and diaphragms.
Installation procedures Painting NOTE: If you are choosing to paint your In-Ceiling loudspeaker, we recommend you do this prior to installation by following these simple steps: 1. Remove the membrane scrim from the inside of the grille (do not fit grille to speaker frame). 2. Place paint mask over the speaker baffle. 3. Paint both the frame and the grille at the same time and with the same batch of paint (if they are to be the same colour). 4.
C265 C-CAM® C280 C-CAM® Tri-Grip MMP®II C265-LCR Tri-Grip C-CAM® IDC™ C280-LCR C-CAM® Tri-Grip IDC™ Tri-Grip Frequency Response 60Hz - 30 Hz Frequency Response 50Hz - 30 Hz Frequency Response 60 Hz - 30 Hz Frequency Response 50 Hz - 30 Hz Impedance (nominal) 6 Ohms Impedance (nominal) 6 Ohms Impedance (nominal) 6 Ohms Impedance (nominal) 6 Ohms Sensitivity (1W@1M) 88.5dB Sensitivity (1W@1M) 90dB Sensitivity (1W@1M) 88.
