Instruction Manual

MicroShockDetector plus
- 5 -
1.3 F U N C T I O N A L I T Y
MONILOG
®
MicroShockDetector plus is a small, universal and cost-effective data logger.
Developed for long-term measurement applications, it is perfectly suited for the monitoring of
transport goods and critical environments.
The integrated sensor system for the detection of shock events and for the measurement of
temperature, humidity, air pressure and light enables a wide range of different measurement
applications. Configured alarm thresholds ensure the reliable detection of exceedances of limit
values. Shock loads are recorded and evaluated in real time, the temperature, humidity, air pressure
and light also in an adjustable interval.
The compact and network-independent design enables
simple fixing on or in transport goods or transport devices with
screws, magnetic feet or adhesive pads.
The case of the device protects against dust and splash water
(degree of protection IP 67) and thus is also suitable for the
exterior use. Thanks to this, the MONILOG
®
MicroShockDetector
plus can be universally used as an almost invisible goods
companion in the international transport of goods, in storage rooms,
at reloading points and during transport by rail, by roads as well as
by water and by air.
The power supply is realised by customary, exchangeable lithium battery cells Thanks to very
low current consumption and associated very long, maintenance-free operating time, the
MONILOG
®
MicroShockDetector plus is perfectly suited for self-sufficient long-term
applications. Energy-optimised operating settings render possible a self-sufficient operational time
of up to 3 years under rough ambient conditions (depending on settings).
The licence-free configuration software MONILOG
®
Analyzer enables a simple and intuitive
configuration of the devices. It offers a comprehensive adjustment of the device functions to your
application-specific requirements. Besides the detailed evaluation of the device data in measured
value tables and graphs, the programme also provides export functions for external applications
(e.g. Microsoft Excel). Communication takes place via a USB interface.
With the status report function, an overview of the measurement data, including the division of all
impacts into acceleration classes and activities of the device, is created immediately without any
necessary settings. The license-free Android app MONILOG
®
Connect enables the device to be
conveniently read out via NFC with a smartphone. When reading out, an overview of all relevant
measurement data and activities of the device is created immediately in the form of a status report
without any necessary settings.