Instruction Manual

MicroShockDetector plus
- 37 -
5 . 2 . 3 R e a d d e v i c e v i a N F C
Figure 29: Information screen for reading out device
After logging in successfully, the MicroShockDetector plus can be read out via NFC. To do this, the
smartphone must be positioned on the device in accordance with the representation without any
gap. The smartphone detects the NFC tag after a short time. The MicroShockDetector plus does not
have to be switched on for reading out with the app.
Note:
The NFC position differs from smartphone to smartphone. Identify the NFC position in the device
manual or move the smartphone slowly over the MicroShockDetector plus until the device
is detected.
If reading out the MicroShockDetector plus is password-protected, you will be asked to enter the
password. After a successful readout, the readout screen opens with a brief overview of the data
and a status report is generated in PDF format.