Instruction Manual

MicroShockDetector plus
- 35 -
The password must have a length of 2 to 8 characters and can consist of numbers, letters and
special characters. In principle, the app can be used without password. Should sensitive information
such as the stored email addresses be accessed or changed, the app must be opened via the “READ
DATA + SETTINGS” button after successfully entering the password.
After setting up the password, the email configuration takes place. Up to 6 email addresses can be
stored in the app to which data can be sent directly.
Figure 28: Email configuration during initial setup
The first email address must always be provided. This is required to reset the password. By setting
the “check mark” to the right of the email address, you can select whether a read-out device status
report should be sent to the associated email address. At least one “check mark” must be set. The
configuration is ended with the “SAVE” button and you are automatically forwarded to the start-up
menu.