User Manual
6 Maintenance
32
PARTS MAINTENANCE
Inspect Acon Maintenance
Rims Inspect for dirt and grease. Use a clean rag or wash with soapy water, rinse, and air dry.
Wheels Check the wheels are securely fastened to the
scooter and axle nuts are ght.
Adjust if necessary and ghten axle nuts.
Spin wheel and check rotaon / alignment is true See bicycle mechanic for repair.
Spokes Check for broken or loose spokes. See bicycle mechanic for repair.
Hub Bearings Li each wheel and see if there is movement side
to side.
See bicycle mechanic for repair.
Frequency: Inspect and maintain at least each use.Wheels
Brakes
Inspect Acon Maintenance
Levers Check the levers are securely fastened to the handlebar. Posion the levers to t the rider’s grip and
screw ght to handlebar.
Pads Check pad posion, gap and pressure. See Secon 4: Adjusng the Brakes
Cables Check the outer casing for kinks, stretched coils and damage.
Check cables for kinks, rust, broken strands or frayed ends.
Check the outer casing for kinks, stretched coils and damage.
Replace cable.
Check the housing is seated properly into each cable stop of
the scooter.
It is recommended that the cables and
housing be replaced every riding season.
Frequency: Inspect and maintain before each use