User Manual
3 Assembly
12
Figure 3.1
WARNING!
• Improper assembly of this product may result in serious
injury or death. Always follow the instrucons in this
manual and check crical components (e.g.: wheels,
brakes, res) before each use.
• We recommend that you consult a bicycle mechanic if you
have doubts or concerns as to your experience or ability to
properly assembly, repair, or maintain your scooter. If your
scooter was obtained assembled, we recommend that you
read these instrucons and perform checks specied in
this manual before riding.
If you need replacement parts or have quesons pertaining to
the assembly of your scooter, call the service line direct at:
1-800-626-2811. Monday - Friday 8:00 am to 5:00 pm Central
Standard Time (CST).
TOOLS REQUIRED
• Phillips head screw driver
• 4 mm, 5 mm and 6 mm Allen wrench
• Adjustable wrench or a 9 mm, 10 mm, 14 mm and 15 mm
open and box end wrenches
• A pair of pliers with cable cung ability
Your new scooter was assembled and tuned in the factory and
then parally disassembled for shipping. You may have
purchased the scooter already fully assembled and ready to ride
or in the shipping carton in the parally disassembled form. The
following instrucons will enable you to prepare your scooter
for years of riding enjoyment.
For more details on inspecon, lubricaon, maintenance and
adjustment of any area please refer to the relevant secons in
this manual. If you have quesons about your ability to properly
assemble this unit, please consult a qualied bicycle mechanic
before riding.
Assembly
❸