Owner's manual

6 Maintenance

PARTS MAINTENANCE

Inspect Acon Maintenance

Tire Inaon Check re pressure. Inate re to the pressure indicated on the re sidewall. See

“Inang a Tire Tube” for more detail. If the re is at see

“Fixing a Flat Tire” for more detail.

Check the bead is properly seated while inang

or reng the re.

Reduce air pressure in the tube and re-seat the bead.

Spin wheel and check rotaon / alignment

is smooth and even.

Loosen axle nut(s) and adjust unl properly seated. If the hub

bearings need repair see a bicycle mechanic for repair.

Bead Seang Check for broken or loose spokes. See bicycle mechanic for repair.

Tread Inspect for signs of excessive wear, at spots or

cuts and damage.

Replace re.

Valves Check that valve caps are ed and free of dirt. Clean dirt from the valve.

Inspect Acon Maintenance

Rims Inspect for dirt and grease. Use a clean rag or wash with soapy water, rinse, and air dry.

Wheels Check the wheels are securely fastened to the

bicycle and axle nuts are ght.

Adjust if necessary and ghten axle nuts.

Spin wheel and check rotaon / alignment is true See bicycle mechanic for repair.

Spokes Check for broken or loose spokes. See bicycle mechanic for repair.

Hub Bearings Li each wheel and see if there is movement side

to side.

See bicycle mechanic for repair.

Frequency: Inspect and maintain at least each use.

Tires

Wheels