Owner's manual

Adjustments 4

Figure 4.35

Figure 4.34

❸ With the front wheel resng on the ground, use an

adjustable, or headset wrench and hold the upper threaded

race in place. Figure 4.34

❹ Loosen the locknut clockwise about 1/32nd of a turn.

Note: The front wheel must be straight to gauge

adjustment.

❺ By hand, screw the upper threaded race down unl bearings

begin to bind. Then back the race o about 1/8 turn.

❻ Tighten the locknut and test that there is no shakiness or

sness (i.e. play) in the headset. Repeat steps 3 - 6 unl

there is no play in the headset.

If the play in the headset cannot be reced with these

adjustments see a qualied bicycle mechanic for these repairs.

Loosen locknut

Hold upper

threaded race

in place

Lower

race

Head

tube

Upper

threaded race

Spacers

Locknut

Stem