Owner's manual
4 Adjustments
44
Figure 4.29 Figure 4.30
ADJUSTING THE HANDLEBAR
Adjusng the Handlebar Height
Instrucons for adjusng the handlebar height depend on
whether your bicycle has a quill or clamp (threadless) stem.
Figure 4.29
WARNING!
• Improper adjustment of the handlebar may result in
damage to the stem post, steering tube and result in loss of
control, serious injury or death. Ensure the minimum
inseron marks on the stem post are not visible above the
top of the headset.
• Failure to properly ghten handlebar components may
result in loss of control, serious injury or death. Always
check the handlebar cannot move and is secured to the
frame before riding the bicycle.
Align the Handlebar (with quill stem)
❶ Stand in front of the handlebar and hold the front wheel
between your legs.
❷ Using a 6 mm Allen wrench, loosen the stem binder bolt
and move the handlebar le or right unl it is aligned with
the front wheel. Figure 4.30
❸ Tighten the stem binder bolt and check the handlebar is
securely aached and cannot move.
Quill Stem Threadless Stem
Handlebar
binder
bolt(s)
Handlebar
binder bolt(s)
Pinch
b i n d e r
bolts
Stem binder
bolt
Stem
binder bolt
Move the handlebar
le or right unl it is
aligned with the
front wheel
2