Owner's manual

3 Assembly

WARNING!

Figure 3.20

ATTACH THE PEDALS

• Aachment of an incorrect pedal into a crank arm can strip

pedal threads and cause irreparable damage. Visually

match the R and L sckers on the pedal and crank arm

before aaching the pedals. Before your rst ride, please

check to ensure your pedals are aached correctly.

• It is very important that you check the crank set for correct

adjustment and ghtness before riding your bicycle.

❶ Match the pedal marked R with the right-hand crank arm

and match the pedal marked L with the le-hand crank arm.

Figure 3.20

❷ Place the threaded pedal into the threaded hole on the

crank arm.

❸ By hand, slowly turn the spindle the correct direcon.

Clockwise for right side pedal, counterclockwise for le side

pedal. Important! Stop if you feel resistance! This may be

an indicaon the spindle is entering the hole at an

angle. Remove the spindle and repeat step two.

❹ If the spindle is entering the hole cleanly then use a 15 mm

wrench or pliers to ghten completely.

❺ Remove the dust caps and ghten the crank axle nuts using

a 15 mm wrench.

The left pedal turns

counter-clockwise and

the right pedal turns

clockwise.