User Manual

4 Adjustments
44
Figure 4.19Figure 4.18
WARNING!
• Improper adjustment of the handlebar may result in
damage to the stem post, steering tube and result in loss of
control, serious injury or death. Ensure the minimum
inseron marks on the stem post are not visible above the
top of the headset.
• Failure to properly ghten handlebar components may
result in loss of control, serious injury or death. Always
check the handlebar cannot move and is secured to the
frame before riding the bicycle.
ADJUSTING THE HANDLEBAR Align the Handlebar (with quill stem)
❶ Stand in front of the handlebar and hold the front wheel
between your legs.
❷ Using a 6 mm Allen wrench, loosen the stem binder bolt, or
pinch binder bolts and move the handle bar le or right
unl it is aligned with the front wheel. Figure 4.19
❸ Tighten the stem binder bolt and check the handlebar is
securely aached and cannot move.
Adjusng the Handlebar Height
Instrucons for adjusng the handlebar height depend on
whether your bicycle has a quill or clamp (threadless) stem.
Figure 4.18
Move the handlebar
le or right unl it
is aligned with the
front wheel
Stem binder
bolt
Quill Stem Threadless Stem
Handlebar
binder bolt(s)
Pinch binder
bolts
Stem binder
bolt
Handlebar
binder bolt(s)
1
2