Specifications
40
The Recognised Name In Security
PROBLEM
CAUSE
CURE
No chirp
Chirps turned off at
module.
Turn chirps back on as per
the installation manual.
Faulty siren.
Check earth to siren.
Check wiring to siren for
breaks.
Alarm in valet.
Turn off valet mode.
Quiet siren
Water in siren cone.
Drain water, relocate
siren
or drill hole i
n cone.
No siren output
Battery back
-
up siren
Turn on battery back
-
up.
Faulty earth.
Check earth connection.
Alarm in valet mode.
Take out of valet.
Break in siren wire.
Check for continuity on
siren wire.
Siren sounds
Vehicle battery flat.
Turn o
ff siren at the key
continuously
(Battery back
-
up only)
at key barrel and charge
vehicle battery.
Siren sounds while
Earth to battery back
-
up
Check earth connection
driving
siren loose.
and relocate if required.
Do not connect earth to
siren bracke
t.
Siren sounds for only one
NSW regulation.
Mandatory in NSW.
30 second cycle
Programmable feature.
Siren chirps on starting
Automatic engine disable
Press remote to cancel.
engine
engaged.
Siren sounds fully on
Engine was disabled by
Standard on some
starting engine
remote.
models.
Refer to owners manual.
Battery back
-
up siren
Check and recharge
sounding because of flat
vehicle battery.
vehicle battery.
Siren chirps once then
More than two remotes
Applicable only to certain










