Specifications

36
30
86
85
87a
87
SHOCK SENSOR INPUT DELAY WITH TURBO TIMER
Shock Sensor Trigger Input to Alarm
Shock Sensor Trigger Wire
True Ignition (Engine side)
1N4004
Parts required available from Dick Smith Electronics
1xSPDT Relay with 400ohm coil part# CAT P-8017
2x2200 uf 16V Electrolytic Capacitors part# CAT R-4196
1x1N4004 Diode
The two capacitors will give a 3-4 second delay on the shock sensor input
wire to the alarm. For more delay just add more capacitors.
.
.
CREATING A CLOSED LOOP CIRCUIT
ALARM
MODULE
Constant 12 V+ Fused
1KOhm Resistor
Trailer Plug
If wire is cut alarm will trigger
Positive Input Trigger Wire
.