Specifications

 Self adhesive sound insulation kits
 Easily trimmed with a knife or scissors
 Each sheet measures 820mm x 460mm x 2mm
 Each sheet weighs 1.22kg
 Improves the sound of your audio system
 Reduces road & tyre noise
 Reduces exhaust & mechanical noise
 Dampens vibration sounds
 Dampens resonance
 Insulates from outside heat*
 Gives your car a quality feel and sound
 Doors shut with a thud (if Q-Mat fitted to doors)
 Supplied in 4, 5 or 9 sheet kits (QM4, QM5, QM9)
Q-MAT Sound Shield
It’s amazing what you miss when suddenly it’s not there any more – in
this case it’s noise !
By simply fitting a Mongoose Q-Mat Sound-Shield sound deadening kit,
you will immediately notice how noisy your vehicle was before – and
how quiet it is now.
The Q-Mat Sound-Shield material is an elastomeric butyl and
aluminium constrained-layer vibration damper. Being a multi-layer
composite, it not only reduces noise and vibration but can also isolate
the heat from outside the car. Closing your car door will sound like a
luxury limousine with that satisfying ‘thump’.
The Q-Mat Sound-Shield is easily cut and moulded to all the variety of
shapes inside your vehicle and self adheres to clean sheet metal and
other hard surfaces.
Our website contains useful information with guides to installation for
the various areas to which Q-Mat can be fitted – and not restricted to
vehicles, such as home heat pumps, under wooden stairs or anywhere
noise and vibration is generated.
Fit Q-Mat to get the biggest difference in how your car feels and
sounds. You wont believe your ears !
Get the latest look for your car interior
with these ultra bright LED lighting strips.
Apart from making your vehicle stand out, just open a door
and these bright LED lighting can aid passenger safety by
illuminating the vehicles interior such as in the foot-well’s as
shown. In fact, you can use them anywhere to add light.
Unlimited uses.
Each kit contains a flexible waterproof 24cm strip of 24
super bright LED's. They operate directly from 12 volts. No
transformer required.
Fix to the vehicle with cable ties or strong double sided tape
(not supplied)
They are dimmable if wired to the vehicle’s lighting control.
Interior or exterior 12 volt use.
For foot-well applications, one kit per foot-well is required.
Available in a range of 5 colours to match the vehicles
interior or night time dashboard illumination.
RED - WHITE - BLUE - GREEN – YELLOW
LED Lighting
Tip: As this product improves the sound quality of
your current audio system, fit Q-Mat before you
choose any audio equipment upgrades.
Tip: When fitting to foot-wells,
the LED’s themselves should
not be seen directly – just
their effect !
Not to be used as daylight running lights
Part numbers: LED24R – LED24W – LED24B – LED24G – LED24Y
Before
After
* Depending on where fitted
Boot and Floors
(Do it Yourself)