Specifications

The CV78HD24 is a complete 32~12 volt reversing camera system suitable
from large vans, motor-homes or heavy commercial vehicles used on the
road.
The system includes a 7.0” dash or screen mounted LCD colour monitor
which can be operated by the screen buttons or remote control.
To complete the system, it includes a 120 degree night vision camera, a 32
to 12 volt power convertor and video signal processing unit and 20m of
heavy duty video cable.
This system has the ability to connect a 2
nd
camera via 4 pin heavy duty
cables. Only one camera can be viewed at a time with automatic switching to
the rear camera when reverse gear is selected.
CV78HD24 - 24 volt
Large Vehicle Reversing Systems
CV78HD12 - 12 volt
The CV78HD12 is a 12 volt system with the same features as the model
above but excludes the 32~12v voltage/video signal processing unit.
It is usually supplied with the MC401 camera but is shown here with the
optional MC402.
Heavy duty video cables & trailer connector
4 lengths available to suit the size of your vehicle:-
5m, 10m, 15m & 20m. (PEC5, PEC10, PEC15, PEC20)
Used to connect the camera to the monitor for both power and video signal.
The PTT is a heavy duty truck and trailer ‘curly cord’ connector with heavy duty plug
connectors.
Products shown on this page are designed for
road use vehicles only.
These products may not be suitable for use off-
road or on heavy plant and equipment.
The MCM720 is a complete 24~12 volt reversing camera system
suitable for trucks, large vans, SUV’s, motor-homes, caravans or any
larger vehicle.
The system includes a remote controlled 7.0” dash or screen
mounted hooded LCD colour monitor.
To complete the system, it includes a 120 degree night vision
camera and a 20m heavy duty video cable.
This monitor system also has the ability to connect a 2
nd
camera via
4 pin heavy duty cables. Only one camera can be viewed at a time
with automatic switching to the rear camera when reverse gear is
selected.
MCM720 – 24~12 volt