Specifications

LCD Colour Reversing Monitors
The LCD250P is a versatile 2.5 inch LCD colour monitor. This unobtrusive monitor is supplied
with a pedestal mounting which can be detached to allow the monitor to be fixed onto a suitable
flat surface. Picture is pre-set and is non-adjustable. 1 x AV input
The LCD355P is a 3.5 inch dashboard or flat panel mounted LCD colour monitor.
Supplied with a remote control to adjust picture quality, AV input and orientation.
2 x AV inputs. 2
nd
input can be used as a DVD screen or connected to any other video source.
The LCD580P is ideal for those larger vehicles like camper vans and SUV’s
due to its excellent viewing size. Included are two mounting options:-pedestal
mounting bracket or framing bezel for flush panel mounting.
2 x video inputs for either a second camera or a DVD/video screen.
Push button and remote controlled.
2.5”
3.5”
The LCD700P is suitable for larger vehicles such as heavy trucks and motor
homes where the mounting point is further away from the driver. This model
can be pedestal mounted to the dashboard or to the windscreen. It can also
be flush mounted into a panel as it includes the framing bezel.
2 x video inputs for either a second camera or a DVD/video screen.
Push button and remote controlled.
5.8”
7.0”
Selection tips:
1. Mirror monitors are unobtrusive and look part of the vehicle.
Looking in from the outside, there are no obvious signs that you
have extra equipment fitted, so break-ins are far less likely.
2. We suggest pedestal types be located as shown in the
photograph. It is less obtrusive and is a place that the eye naturally
goes to as it is close to the left side door mirror.
The LCD430M is also universal as it clips over your existing rear view
mirror.
The right side is the interior mirror, whilst the left side is the dedicated LCD
monitor. Picture quality, orientation and AV input can be selected from the
monitors control buttons or by the supplied remote control.
2 x video inputs.
The LCD43T is a touch screen controlled 4.3” mirror monitor which
replaces your existing rear view mirror and mounting bracket. This model is
only suitable for certain compatible vehicles – please check with your
Mongoose dealer.
2 video inputs (camera & other video source such as a DVD or 2
nd
camera).
The LCD43M is a universal version of 4.3” LCD colour monitor as it clips over
your existing rear view mirror.
Touch screen control adjustments. 2 video inputs.
4.3” Mirror Monitors
Complete with replacement on-glass mounting bracket
We offer a wide range of colour monitors for your reversing camera.
The main choice depends on the size required which is governed by how
far you are away from it whilst driving and how you want it to look when it
has been installed into your vehicle.
Pedestal / Flat Mount Monitors
The ‘M’ models clip over your existing mirror