Specifications

Parking / Reversing Sensors
MPR - rear parking
Includes boot mounted sound warning buzzer, 4 detachable
sensors, control module and 21.7mm bumper hole cutting tool.
Avoid those parking or reversing accidents with these
automatic audible warning sensors.
Reversing / parking
Whether you are reversing or parking, it’s reassuring to know
that you can do so safely – without hitting anything !
When reverse gear is engaged the sensors switch on
automatically and if the sensors detect a person or obstacle,
the system can give you an audible warning (also visual if one
of the options is specified).
The warning is in 3 stages; at 1.0 – 0.75 - 0.5 metres. As
you get closer the warning beeps get quicker until they sound
continuously which is your signal to stop – and you should be
0.5m away.
Sensors are available in black or white but can be painted, at
extra cost, to colour match your vehicle.
Each kit is supplied with 4 sensor heads.
Forward nose-in parking
The majority of new cars today are designed to be sleek for
god looks and for fuel economy, but it is often difficult to see
where the front of the vehicle is as the bonnet just disappears
from view. You either park too far away or as most of us has
done, too close with that annoying and expensive noise !
By fitting the MPF-S sensors, you can judge when to stop
within just 0.5 metres away from a wall in front of you.
The sensors switch on and off automatically with your brake
pedal. They stay on for 10 seconds after the brake pedal is
released just to make sure your park safely – and
inexpensively!
MPR-B
Optional combined on/off switch,
flashing display and buzzer for MPR
system,
MPR-D
Optional LCD display that shows
distance to a detected object and
sound warning buzzer for MPR
system,
MPR-S – rear parking
Auto ON when reverse gear selected. Includes 3 level sound
warning buzzer, 4 detachable slimline sensor heads, control
module and bumper hole cutting tool.
MPF-S – front parking
Auto ON when brake pedal depressed. Stays on for 10 seconds
after brake release. Includes 3 level switched sound warning
buzzer (high, medium, off), 4 detachable slimline sensor heads
supplied, but 2 are sufficient for most vehicles, control module
and 19mm bumper hole cutting tool.
22.5mm
25mm