Operation Manual
7
Before Use
Do not use the robot cleaner in a place where the temperature is too low or too high (lower than -5°C and higher than 35°C).
●
This may cause damage to the product.
Do not use the robot cleaner when the dust bin is completely lled up.
●
This may reduce the suction power.
Never use the robot cleaner without the lters.
●
Doing so may cause a malfunction of the robot cleaner.
Remove objects (such as loose clothing, towels, cloths, belts, or hairs) scattered on the oor before cleaning.
Keep objects away from brushes and wheels to prevent entanglement.
●
This may cause noise, reduce the suction power, and damage the robot cleaner.
Do not use the robot cleaner in a place where the oor or wall is made of glass or mirrors.
●
The robot cleaner detect obstacles by using an IR sensor, so it may not detect glass and mirrors as obstacle.
Do not use the robot cleaner in a utility room, on a wet oor, on stairs, on a table or shelf, in an underground room, in
a warehouse, in a commercial building, or outdoors.
If you have dropped or given an impact to the robot cleaner, contact your service center.
Electrical instructions
Please use the power source and socket with the correct voltage and current.
●
If you use a power source or socket that does not t the power specications, there is the risk of re, electrical shock,
and damage to the robot cleaner.
Make sure the power cord is not bent or crushed by heavy objects.
●
A damaged power cord may cause re or electrical shock.
●
To repair or replace a damaged power cord, contact a qualied service agent to ensure your safety.
When plugging in or removing the power plug, always plug it in or remove it by holding the plug, not the cable.
●
Stress on the cable will damage the power cord, which may cause re or electrical shock.
Do not use a damaged power cord! To repair or replace a damaged power cord, contact a qualied service agent to
ensure safety.
●
If a non-qualied person repairs the power cord, there is a risk of re or electrical shock.