Operation Manual

14
Robot Cleaner
Installing the Charger
2
1
●
Connect the power adaptor.
●
Set the robot cleaner detection distance (5 m or 8 m).
●
Place the power adaptor in the holder of the charger.
●
Check the power connection (blue lamp).
3
●
Check the location of the charger.
- Clear all obstacles in the area within 1 m
in front, left, and right of the charger .
▶
If you install the robot cleaner in a place where it will be exposed to direct sunlight, the heat of the sun may
interfere with the auto charging, and the robot cleaner may become discolored over time.
▶
If your robot cleaner can’t return to the charger, reset the detection distance.
-
In a narrow area, set it to 5 m, and in a wide area, set it to 8 m.
-
If you set the detection distance to 8 m in a narrow area, the auto charging may be interfered with.