Operation Manual

7
Before Use
 Do not use the robot cleaner in a place where the temperature is too low or too high (lower than -5°C and higher than 35°C).
Þ
  This may cause damage to the product.
  Do not use the robot cleaner when the dust bin is completely lled up.
Þ
  This may reduce the suction power.
  Never use the robot cleaner without the lters.
Þ
  Doing so may cause a malfunction of the robot cleaner.
 Remove objects (such as loose clothing, towels, cloths, belts, or hairs) scattered on the oor before cleaning.
Keep objects away from brushes and wheels to prevent entanglement.
Þ
  This may cause noise, reduce the suction power, and damage the robot cleaner.
  Do not use the robot cleaner in a place where the oor or wall is made of glass or mirrors.
Þ
  The robot cleaner detect obstacles by using an IR sensor, so it may not detect glass and mirrors as obstacle.
  Do not use the robot cleaner in a utility room, on a wet oor, on stairs, on a table or shelf, in an underground room, in
a warehouse, in a commercial building, or outdoors.
  If you have dropped or given an impact to the robot cleaner, contact your service center.
Electrical instructions

  Please use the power source and socket with the correct voltage and current.
Þ
  If you use a power source or socket that does not t the power specications, there is the risk of re, electrical shock,
and damage to the robot cleaner.
  Make sure the power cord is not bent or crushed by heavy objects.
Þ
  A damaged power cord may cause re or electrical shock.
Þ
  To repair or replace a damaged power cord, contact a qualied service agent to ensure your safety.
  When plugging in or removing the power plug, always plug it in or remove it by holding the plug, not the cable.
Þ
  Stress on the cable will damage the power cord, which may cause re or electrical shock.
  Do not use a damaged power cord! To repair or replace a damaged power cord, contact a qualied service agent to
ensure safety.
Þ
  If a non-qualied person repairs the power cord, there is a risk of re or electrical shock.
Downloaded from www.Manualslib.com manuals search engine