Operation Manual

20
Robot Cleaner
Before You Start
Check the following before you start the robot cleaner.
1
Be careful not to break the robot cleaner when you pull the robot cleaner out of the box.
For information of installing the robot cleaner, see page 14.
2
Check the location (L/R) of the brushes and install them.
For information on installing the brushes, see page 15.
3
Pull the robot cleaner out and manually charge it rst.
When you start the robot cleaner for the rst time, it may not work, as the battery has probably been
discharged. For information on manual charging, see page 17.
4
Remove any obstacles on the oor.
Remove small objects, clothes, and fragile objects from the oor before cleaning. Fold up lengthy carpet/rug
tassels or keep the robot cleaner away from them.
5
If the dust bin is full, the cleaning performance will be reduced. Emptying the dust bin frequently is highly
recommended.
For information on cleaning the dust bin, see page 37.
6
If there is anything on cli detection sensors or wheels, remove it.
This may cause failure or malfunction of the robot cleaner. For information on cleaning cli detection sensors and
wheels, see page 39.
7
Children and seniors may be surprised at the sight of the robot cleaner in operation.
Please let children and seniors know about the operation of the robot cleaner.
8
Be careful not to drop the robot cleaner from a high place.
Do not use the robot cleaner on a narrow and a high place such as a desk, table, etc. If shoes are placed side by side
at the entrance to the living room, the robot cleaner may recognize them as the oor, which may cause falling.
9
The robot cleaner cannot climb over a threshold higher than 1cm.
10
After charging is complete, keep the robot cleaner docked in the charger, or turn the power switch o which
is located on the lower rear side of the robot cleaner.
Downloaded from www.Manualslib.com manuals search engine