Ver 1.2 Robot Cleaner User Manual ME685 Series Thank you for purchasing the ME685 series robot cleaner. Before using the product, please read this User Manual carefully, and keep it for future reference. Depending on your model, some contents of this User Manual may differ from the actual product. The contents of this User Manual are subject to change without notice. Downloaded from www.Manualslib.
Downloaded from www.Manualslib.
Robot Cleaner User Manual ME685 Series Downloaded from www.Manualslib.
Features Mop Cleaning Utilizing the attachable full sized mop, the mop cleaning mode is optimized for cleaning even the finest dusts that are harmful to health. Big Mop with Water Supply System By Water Supply System, the Big Mop is continuously moistened to clean your hard floors during the cleaning cycle. Shadow Cleaning This is a function that enables you to clean area where the light does not reach. In Shadow Cleaning mode, you can intensively clean areas under the bed, sofa, etc.
8.6 cm Slim Design 8.6cm With a slim design, the MONEUAL ME685 is just 8.6 cm high, enabling it to clean under the bed and the sofa, where it is difficult to clean with a vacuum cleaner or by hand. Eco-friendly Lithium Iron Phospate Battery The MONEUAL ME685 uses an eco-friendly battery that does not contain any heavy metals or acids that are harmful to the human body.
Contents Before Use Installing Product Operation Features 02 Safety Information What’s in the Box Overview Language Setting 36 05 Cleaning the Dust Bin 37 10 Cleaning the Dust Filter 38 11 Cleaning Sensors and Wheels 39 Cleaning the Dust Inlet 40 Using and Managing the Battery 41 Voice Guidance 44 Error Message Description 45 Troubleshooting 47 Specifications 48 Product Warranty 51 Installing the Charger 14 Instal
Before Use Safety Information Please read and follow the instructions in this manual to ensure your safety and the safe use of your robot cleaner. Safety symbols In this manual, various Warnings, Cautions and Notes are provided to help you to avoid potential hazards that can hurt you and/or damage your robot vacuum cleaner. You may be killed or seriously injured if you do not follow this instruction.
Robot Cleaner Install the charger in a location that can be easily accessed by the robot cleaner. Þ If you install the charger in a corner or if there are many obstacles around the charger, it may prevent the robot cleaner from automatically charging. Make sure that the charger is always plugged into a power source. Þ If no power is supplied to the charger, you will not be able to use the automatic charge function. When you use Do not use the power adaptor with another appliance.
Before Use Do not use the robot cleaner in a place where the temperature is too low or too high (lower than -5°C and higher than 35°C). Þ This may cause damage to the product. Do not use the robot cleaner when the dust bin is completely filled up. Þ This may reduce the suction power. Never use the robot cleaner without the filters. Þ Doing so may cause a malfunction of the robot cleaner.
Robot Cleaner Do not touch the plug or wall socket with wet hands. Þ Doing so may cause electric shock. If you spill water into the robot cleaner, unplug the power cord and allow the unit to dry completely before use. Þ Water can bring the risk of fire and electrical shock. Þ Immediately remove the power cord from the outlet and contact your service center. Do not use chargers other than the charger that came with your robot cleaner.
Before Use Please clean the robot cleaner after turning it off. Þ If you clean it when the power is on or it is operating, it may cause injury. Clean the main brush, dust bin, dust filter, and dust inlet periodically. Þ If you use the robot cleaner for a long time without cleaning it, there is the risk of malfunction and damage. Copyright and instructions Þ Copyright © 2014 MONEUAL Inc. All rights reserved. Þ Published March 5, 2014.
Robot Cleaner What’s in the Box Charger Power adaptor Power cord Remote control (included two AAA batteries) Ver 1.0 Robot Cleane Quick Start r Guide ME685 Series Robot cleaner (1400mA built-in battery) Side brushes (1 set) Cleaning brush User manual Quick start guide Mop kits Water Supply Big Mop Kit 1. Water Supply mop plate for a big mop 2. Big mop 3. Mop cleaning brush Ě The appearance and specifications may be changed without notice in order to improve functions or performance.
Before Use Overview Robot cleaner 2 ǘTopǘ 1 3 4 ǘRearǘ 6 7 8 1 Control buttons and indicators 2 Dust bin cover 3 Bumper 4 Obstacle and signal detection sensors 5 5 Air outlet 9 10 6 Adaptor jack 7 Power switch ǘBottomǘ 13 12 9 8 Signal receiving sensor 11 12 9 Cliff detection sensors 9 10 Charging terminals 11 Wheels 11 11 12 Side brush installation pins 13 Dust inlet 14 15 14 Main brush 15 Mop plate installation holes 11 Downloaded from www.Manualslib.
Robot Cleaner Control buttons and indicators 1 Start/stop button 10 9 2 Power button 8 3 Cleaning mode selection button 11 4 Vacuum Cleaning mode indicator 12 7 5 Charging mode indicator 13 6 6 Shadow cleaning mode indicator 14 5 4 15 7 Intensive Cleaning mode indicator 8 Hybrid Cleaning mode indicator 9 Mop cleaning mode indicator 1 2 10 Timer (every day) indicator 3 11 Timer (1 hour) indicator 12 Double Cleaning option indicator 13 Threshold option indicator 14 Battery
Before Use Remote control You can conveniently access the various functions of the robot cleaner with your remote control. Functions that can be controlled through the control panel on the robot cleaner: Hybrid cleaning, Vacuum cleaning, Mop cleaning, Intensive cleaning, Shadow cleaning, and Charging.
Robot Cleaner Installing the Charger 1 Connect the power adaptor. Þ Set the robot cleaner detection distance (5 m or 8 m). Þ Place the power adaptor in the holder of the charger. Þ 2 Þ 3 Þ Check the power connection (blue lamp). Check the location of the charger.
Installing Installing the Side Brushes Check for the L mark under the side brush. Check for the R mark under the side brush. Þ Align with the L mark under the robot cleaner and install the L brush. Þ Þ Align with the R mark under the robot cleaner and install the R brush. Þ 15 Downloaded from www.Manualslib.
Robot Cleaner Remote Control Install the battery into the remote control. Ě Make Ě If sure to properly orient the + and – poles of the batteries when inserting the battery. you insert batteries incorrectly, there is a risk of fire or damage to the remote control. Be careful if you use non-standard 1.5V batteries, as this may cause damage to the product and its function. If your battery has had a leakage, immediately replace it.
Installing Charging If you have prepared the charger, main body, and remote control, you must then charge the battery of the robot cleaner to use it. To charge the robot cleaner, follow these steps: 1 Þ 2 Þ Turn the power switch on. Hold the robot cleaner with both hands and put it on the charger. Match the terminals of the robot cleaner with the terminals of the charger.
Robot Cleaner Installing the Water Supply Big Mop Kit 1 Þ 3 Þ Supply water into the mop plate and attach the mop to it. Attach the mop plate. Fit the joint parts well to the holes of the robot cleaner. Ě If you apply excessive force to the mop plate when you install it on the robot cleaner, the joint parts of the mop plate may be damaged. 4 Flip it over and turn the system power switch on. Þ 18 Downloaded from www.Manualslib.
Installing Ě After cleaning, remove the mop plate from the robot cleaner and the mop from the mop plate. Ě Remove Ě Wash Ě You water in the mop plate and let the cover open to dry the mop plate. and dry the mop for the next use. may use the included cleaning brush for cleaning the mop more thoroughly. 19 Downloaded from www.Manualslib.
Robot Cleaner Before You Start Check the following before you start the robot cleaner. 1 Be careful not to break the robot cleaner when you pull the robot cleaner out of the box. For information of installing the robot cleaner, see page 14. 2 Check the location (L/R) of the brushes and install them. For information on installing the brushes, see page 15. 3 Pull the robot cleaner out and manually charge it first.
Product Operation Starting & Stopping Cleaning Starting cleaning 1 Turn the power switch on. Þ 2 3 or or 4 If you are cleaning an area that is difficult to clean using auto cleaning mode, change to the proper cleaning mode. Þ Stopping cleaning After cleaning, the robot cleaner returns to the charger or stops on the spot according to the cleaning mode. If you press the Start/stop (ⶺ Ħ ) button when the robot cleaner is operating, the cleaning will be stopped. or 21 Downloaded from www.
Robot Cleaner Changing the cleaning mode User can set the cleaning mode to match the cleaning environment.
Product Operation How to Recharge the Battery Auto charging W hen the robot cleaner has finished cleaning, it returns to the charger. Þ If the battery is low and the battery indicator is blinking rapidly, the robot cleaner will stop cleaning and return to the charger to charge. Þ Manual charging H old the robot cleaner with both hands and put it on the charger. Þ M atch the terminals of the robot cleaner with the terminals of the charger.
Robot Cleaner Hybrid Cleaning In Hybrid Cleaning, the robot cleaner performs the Vacuum Cleaning and Mop Cleaning at the same time. Hybrid Cleaning offers a comprehensive floor care solution because of the use of the twin side brushes, the main brush, the BLDC suction, and the reusable microfiber Big Mop with the Water Supply System all together. The Hybrid Cleaning is recommended for comprehensive cleaning on your hard floors.
Product Operation Vacuum Cleaning Vacuum cleaning is used where the needs are vacuum suction only without mop cleaning. It can be used on hard floor or carpet. 1 2 Turn the system power switch on. Þ Turn the main power button on. Þ or 3 or 4 Ě While in Vacuum Cleaning mode, you can also select Turbo Option, Double Cleaning Option and Threshold (climb over) Option. To select these options, please refer to the pages that reference each. 25 Downloaded from www.Manualslib.
Robot Cleaner Mop Cleaning Mop Cleaning mode is used for when you need mopping only without vacuuming. Ě If Mop cleaning mode is used on carpet or rug, the carpet or rug can be damaged. Therefore, please use the Mop cleaning mode only on hard floor. Ě For Big Mop with Water Supply System, we recommend moistening the Big Mop before attaching it for longer wet cleaning performance. 1 Follow the directions on page 18 to attach the Big Mop with the Water Supply Tank.
Product Operation Selecting the mop cleaning mode You can select the mop cleaning mode by pressing the Mode (M) button when it is cleaning in mop cleaning mode. or The mode will be changed as follows: Wave mode Zigzag mode Wave mode Zigzag mode 27 Downloaded from www.Manualslib.
Robot Cleaner Other Cleaning Modes and Options Cleaning Mode Function For Where How to Select Intensive Clean in 1m x 1m area where the robot cleaner located.
Product Operation Intensive Cleaning The robot cleaner intensively cleans the surrounding area relative to its current location. 1 2 Turn the power switch on. Þ or 3 or 4 Ě In Intensive cleaning mode, the robot cleaner stops on the spot after it has finished the cleaning. Ě In the area in which there are many obstacles, the robot cleaner may not operate in normal cleaning modes. 29 Downloaded from www.Manualslib.
Robot Cleaner Shadow Cleaning You can clean under your bed or furniture. Ě To use shadow cleaning mode, turn the room light on. In a dark room, the robot cleaner can’t detect the space under the bed or furniture. Ě The robot cleaner moves to a place under the bed or furniture to start shadow cleaning. To reduce the time spent moving through the room, put the robot cleaner in front of the bed or furniture under which you want to perform shadow cleaning. 1 Turn the power switch on.
Product Operation Corner Cleaning The robot cleaner runs along the walls of the current place where it is. If the robot cleaner takes a turn around the walls or detects the signal of the charger twice, it will finish cleaning. 1 Turn the power switch on. Þ 2 or 3 4 Ě If the robot cleaner finishes cleaning, it will return to the charger. 31 Downloaded from www.Manualslib.
Robot Cleaner Manual Cleaning You can control the robot cleaner directly using the remote control. 1 Stop the robot cleaner that is operating by pressing the Start/stop (Ě Ħ) button. Þ or 2 Press the MANUAL button on the remote control. Þ Air suction will start in its current place. If you press the MANUAL button again, air suction will be stopped. 3 By pressing direction keys on the remote control, you can move the robot cleaner where you want it to go.
Product Operation Scheduled Cleaning (Reservation Cleaning) For daily efficient hands free cleaning, the robot cleaner provides 2 Reservation Cleaning Modes. One starts cleaning after 1 hour from the time you set it and the other starts at the same time everyday. Ě Reservation Cleaning only works from the charging station after you set the Reservation Cleaning. You must put the robot cleaner on the charging station to begin at the scheduled time.
Robot Cleaner Turbo Option While you are using the Hybrid / Vacuum / Intensive / Shadow / Manual Cleaning, by pressing Turbo option on the remote controller you can control Vacuum power. Ě Turbo option is not available in Hybrid Cleaning mode and Mop Cleaning mode. or Power off Power on Threshold Option For less than a 1cm threshold height, the user is able to choose threshold climbing over ON/OFF option by the remote control.
Product Operation Double Cleaning Option The Double Cleaning Option performs 2 cleaning sessions of a selected cleaning mode. Press the Double CL button on the remote control to choose a Double Cleaning option. Ě Double Cleaning Option is not available in Manual Cleaning mode and Scheduled Cleaning mode. 35 Downloaded from www.Manualslib.
Robot Cleaner Language Setting Ě You can select a language for voice guidance from the ones available in the system. 1 2 First, turn the power switch on. Then press and hold the Mode button for 2~3 seconds until the display appears with a beep sound. Turn the power switch off. 3 Keep pressing the Start/Stop button until you have reached the language you desire. Whenever you press the Start/Stop button, you will hear the following sentence as a different language. - ˈStarting automatic cleaning.
Maintenance Cleaning the Dust Bin 1 2 Remove the dust bin cover. Remove the dust bin. 3 4 Empty the dust bin. Remove the dust filter. 5 6 Replace the dust bin in the robot cleaner. Replace the dust filter. Ě Make sure to follow the directions carefully when installing the dust bin. 7 Click Ě To clean the dust filter and determine its lifetime, see page 38. Replace the dust bin cover. 37 Downloaded from www.Manualslib.
Robot Cleaner Cleaning the Dust Filter Ě The dust filter can be easily cleaned by gently scraping off the surface or compressed air. The It Ě We If dust filter is reusable. is recommended not to clean with water. recommend that you clean the dust filter whenever the bin is more than 2/3 full. you do not clean the dust filter, the suction power of the robot cleaner can be reduced. Ě Replace the dust filter if you notice a tear or a hole.
Maintenance Cleaning Sensors and Wheels Cleaning sensors Clean (blow or wipe) the three sensors with the included cleaning brush or a cotton swab. Þ If sensors are severely contaminated, wipe with a moistened cotton swab. Do not wipe directly with water, and do not use benzene or alcohol to clean sensors. Cleaning wheels Clean wheels using the brush. Þ To clean the front wheel, remove the screws and remove the wheel, and clean it with the brush.
Robot Cleaner Cleaning the Dust Inlet 2 1 Remove the dust inlet cover. 3 Remove the main brush. 4 Clean the removed main brush with the cleaning brush. 5 To reinstall the dust inlet cover, insert the 2 tips to the matching holes on the robot cleaner. 40 Downloaded from www.Manualslib.com manuals search engine Check the groove’s shape and insert the main brush into the fixing hole, and then secure the wing of the fixing pin to the fixing pin.
Maintenance Using and Managing the Battery The battery is a consumable item. The more you use the battery, the shorter the battery’s lifetime. Battery lifetime We guarantee 6 months of use in a normal environment. Þ Always charge the battery for the best use experience. Þ The battery lifetime may vary depending on the use environment. Þ Charging battery If you are using the robot cleaner for the first time, please fully charge the battery first.
Robot Cleaner Battery replacement If you notice that the operating time has been significantly reduced, you may need to replace the battery. Þ You must use a battery that is manufactured by Moneual. Þ Remove the battery from the robot cleaner when the system power is off. Þ Dispose of your old batteries according to the local laws and regulations of your region. To purchase an extra battery, please contact our customer service.
Maintenance 4 Install the new battery and connect the battery cable connector. Replace the battery cover and tighten with four screws. Battery handling and safety information I f you leave the fully discharged battery for a long time, the battery may become damaged and you may not be able to use it. Þ I f you use a battery other than Moneual’s for use with the robot cleaner, the robot cleaner or the battery may be damaged. Þ R emove the battery before disposing of the robot cleaner.
Robot Cleaner Voice Guidance Following voices are the basic voice list. Depending on your model, some contents of these voices may differ from the actual voices. Voice Guidance Starting CORNER Cleaning. The robot cleaner will start corner cleaning. Starting intensive cleaning. The robot cleaner will start intensive cleaning. Starting pre-set cleaning The robot cleaner will start the scheduled cleaning. Starting Shadow Cleaning. The robot cleaner will start shadow cleaning. Cleaning is completed.
Maintenance Error Message Description Ě The cleaner will display combination of numbers and icons to inform users of what the issue is. Using the information below, it is important to resolve the issue first as pressing any button will clear the error message. Ě If the problem has not been solved with one of the solutions below, please contact your customer service. Ě The error voice guidance comes only one time when the error has occurred.
Robot Cleaner Cause You operated the robot cleaner without the dust bin. Voice Dust bin is missing. Solution Cause Both main wheels have been lifted. Voice Please place the cleaner on the floor. Solution Replace the dust bin. Put the robot cleaner on the floor or move it to another place. Cause Escape rough road mode continually occurred in excess of the limit while moving. Voice Please check the front wheel. Solution Remove obstacles from the front caster and empty the dust bin.
Customer Support Troubleshooting Problem Solution The robot cleaner does not work. ̞ Turn off the power switch on the lower-rear side. ̟ Check the battery. Charge the battery in the charger. The robot cleaner does not charge. ̞ Remove any obstacles around the charger. ̟ Check if the power cord is connected to the charger. ̠ Turn on the power switch at the rear of the charger. è If you charge the robot cleaner affectedly, it may not be charged. The remote control does not work.
Robot Cleaner Specifications Robot cleaner Model ME685 Dimensions 348 mm (Diameter) x 86 mm (Height) Weight 2.674 kg Speed Cleaning mode: 32 cm/sec., Driving mode: 30 cm/sec. Operating noise - Max. 68 dB (1400 mAh battery) - Max. 70 dB (2800 mAh battery) Power consumption - Max. 20 W (1400 mAh battery) - Max. 25 W (2800 mAh battery) Battery Lithium iron phosphate (LiFePO4) 12.8V DC Dust bin capacity 600 ml Charging time - About 60 minutes (1400 mAh battery) - Max.
Customer Support Remote control Model MRC6500 Dimensions 139 mm (W) x 22 mm (H) x 50 mm (D) Weight 66 g Battery AAA size x2 Signal Transmission Distance (IR) 5m 49 Downloaded from www.Manualslib.
Downloaded from www.Manualslib.
3URGXFW :DUUDQW\ The warranty service we provide to our consumers is based on the customer compensation regulation. If you request warranty service, MONEUAL will provide the service. The company will notify the customer of whether he or she will be compensated and the details of the compensation within seven (7) business days after the day of the customer’s request, and offer the compensation within fourteen (14) business days after the day of notification.
Downloaded from www.Manualslib.
Downloaded from www.Manualslib.
Customer Service JOGP!NPOFVBM FV Before you call for service, please be ready to provide the following information: ˍGModel name ˍGA description of your problem ˍGPhone no. & address www.moneual.eu Downloaded from www.Manualslib.
