Operation Manual
6
Robot Cleaner
Install the charger in a location that can be easily accessed by the robot cleaner.
Þ
If you install the charger in a corner or if there are many obstacles around the charger, it may prevent the robot cleaner
from automatically charging.
Make sure that the charger is always plugged into a power source.
Þ
If no power is supplied to the charger, you will not be able to use the automatic charge function.
When you use
Do not use the power adaptor with another appliance.
Þ
This may cause damage to the appliance and re by overheating.
Ensure that clothes or any part of the body (hair, nger, foot, etc.) do not get entangled in the brushes or wheels.
Þ
This may cause injury.
Do not use or store the robot cleaner near ammable materials (alcohol, gasoline, kerosene, thinner, etc.) or heating
sources (cigarettes, candles, stove, etc.).
Þ
This may cause re and damage to the robot cleaner.
If you notice smoke or a burning smell coming from the robot cleaner, immediately turn the power switch o and
contact your service center.
Do not stand or sit on the robot cleaner.
Þ
Movement of the robot cleaner may cause injury or the robot cleaner may be damaged.
Do not use the robot cleaner on a narrow high place such as a desk, table, etc.
Þ
The robot cleaner may fall o which could cause injury or damage to the product.
Do not let the robot cleaner pass over or sweep up liquids, oil, pet droppings, etc.
Þ
This may cause malfunction of the robot cleaner and damage.
Þ
Liquid on the wheels may cause stains in other places.
If the robot cleaner sucks a plastic bag in while operating, immediately remove it.
Þ
If you run the robot cleaner for a long time with the dust inlet covered with a plastic bag, the motor will be overheated
and the robot cleaner will be damaged.
Do not press strongly or impact the bumper.
Þ
This may cause damage to bumper sensors and malfunction.
Downloaded from www.Manualslib.com manuals search engine