VFI Series User's Manual
VFI33 Vent Free Gas Fireplace System
26
20307670
LOG PLACEMENT
Figure 30 - 
Place Left Front Log #5
Left Front Log #5
5.  Place left front log (#5) on left pin located on burner and 
left grate bar. Rest top right portion of log on right front 
log.  Figure 30
Figure 31 - 
Place Middle Left Log #6
Middle Left 
Log #6
6.  Place top left log (#6) on unit by placing grooved portion 
of log onto left grate bar with bark facing outward. Rest 
front part of log in groove on left front log. Figure 31
7. Place left top log (#7) on left rear log (#4) and left front 
log (#5) using locating grooves on bottom of #7 and 
locating blocks on logs #4 and #5. Figure 32
8.  Place right top log (#8) onto right rear (#3) and right 
front (#2) logs using locator on bottom of right top log. 
Figure 32
Figure 32 - 
Place Right Top Log #8
Left Top 
Log #7
Right Top 
Log #8
PLACE THE DECORATIVE ROCK 
Optional volanic rock may be placed around the unit on 
the fl oor of the fi rebox. Be sure to avoid any areas on the 
burner itself.
DO NOT sprinkle volcanic rock on the logs, 
around the pilot, or on or near burners. This 
may cause sooting. Place volcanic rock only 
on the fl oor of the fi replace.
During initial operation of the new heater, new 
burning logs and/or rock wool will give off a 
paper burning smell and orange fl ames will be 
present. Simply open the windows for a few 
hours to vent the odor.
CAUTION










