Product specifications

12
27D8520
VWF Series Vented Gas Log Set


Fill the burner pan with vermiculite to the bottom of the rear
log and sloped to the front edge of the burner pan. Excess
vermiculite can spill forward or to the side of the burner
pan. Do not overll the propane model. Do not cover the
pilot (if SPK or MVVK is installed) with vermiculite or rock
wool (embers).


The Wildre ame appearance can vary due to differences
in draft and replace congurations and ember placement.
After installing rear (#1) and front logs (#2 and #3), cover
the entire top surface of the vermiculite in the burner pan
with the rock wool supplied with unit. Tear the rock wool
into pieces approximately 1/2" in size (roughly the size of a
nickel) and cover the burner evenly. Do no use more rock
wool than the amount supplied with the unit. To enhance
the appearance of the Wildre ame, it is recommended
to form a mound of rock wool in the center of the burner,
2" to 3" high, visible through the two front logs.


Sprinkle volcanic rock in front of front glowing embers
and to both sides.








1. Slide shield plate behind burner pan. Figure 11
2. Center rear log #1 on grate bars and ush with rear of
the grate. Figure 12
LG837
VWF18 shield plate
Shield Plate
Burner Pan
LG837


LG838
VWF18MO rear log
Rear Log #1
LG838

