Instruction manual

GAS PIPING AND GAS PRESSURE REQUIREMENTS
8
REGULATOR BRACKET
REGULATOR BRACKET
CONTROL KNOB
CONTROL KNOB
IGNITOR BUTTON
IGNITOR BUTTON
NOTE:
NOTE:
MAIN REGULATOR
MAIN REGULATOR
A PLUGGED 1/8" NPT TAP MUST BE LOCATED SOMEWHERE BETWEEN THE
A PLUGGED 1/8" NPT TAP MUST BE LOCATED SOMEWHERE BETWEEN THE
SHUTOFF VALVE AND THE HEATER'S 3/8" NPT INLET FITTING.
SHUTOFF VALVE AND THE HEATER'S 3/8" NPT INLET FITTING.

GAS SUPPLY LINE
GAS SUPPLY LINE
JOIST
JOIST
UNION
UNION
TEE
TEE
SEDIMENT TRAP
SEDIMENT TRAP
SHUTOFF VALVE
SHUTOFF VALVE
FLOOR
FLOOR
3/8" NPT INLET FITTING FOR GAS
3/8" NPT INLET FITTING FOR GAS
SUPPLY IN BOTTOM OF HEATER.
SUPPLY IN BOTTOM OF HEATER.
FIGURE 3
UNION
SHUTOFF
VALVE
JOIST
SEDIMENT
TRAP
TEE
GAS SUPPLY
LINE
FLOOR
NOTE:
A PLUGGED 1/8" NPT TAP MUST BE
LOCATED SOMEWHERE BETWEEN THE
SHUTOFF VALVE AND THE HEATER'S
3/8" NPT INLET FITTING.
IGNITOR BUTTON
CONTROL KNOB
FLOOR STAND REQUIRED IF 
FLOOR STAND REQUIRED IF 
HEATER IS TO BE INSTALLED 
HEATER IS TO BE INSTALLED 
AS A FREESTANDING HEATER.
AS A FREESTANDING HEATER.
(FLOOR STAND SOLD AS AN ACCESSORY.)
(FLOOR STAND SOLD AS AN ACCESSORY.)
FLOOR PROTECTION REQUIRED
FLOOR PROTECTION REQUIRED
FOR ANY COMBUSTIBLE FLOOR
FOR ANY COMBUSTIBLE FLOOR
MATERIAL OTHER THAN WOOD.
MATERIAL OTHER THAN WOOD.
3/8" NPT INLET FITTING FOR GAS
3/8" NPT INLET FITTING FOR GAS
SUPPLY IN BOTTOM OF HEATER.
SUPPLY IN BOTTOM OF HEATER.
FIGURE 2
53D9012. Rev 1 03/03