Operating instructions
83D0511
ILDV20/30/40 Fireplace Insert
31
Make sure the gas valve knob is in the “OFF” position. Wait at least ve (5) minutes before
start-ing maintenance.
A qualied agency should examine the venting system annually.
Clean the ceramic glass periodically. Condensation will sometimes form on the glass during a
cold startup. This is normal for all gas replaces and inserts. This condensation often attracts
dust and lint to the surface of the glass. The initial paint curing of the appliance can also leave
a slight lm on the glass. This is a temporary problem.
You should clean the glass after the rst two weeks of use. After that, you should clean the
glass no more than two or three times a season. Use a mild glass cleaner to clean the door.
Do not use abrasive cleaners. They will damage the glass surface.
Visually check pilot and burner ames periodically. Refer to Figure 36 for typical burner ame.
Refer to Figure 37 for typical pilot ame.
LG535
ILDV log flame
9/08
Figure 36 -
Typical Burner Flame
LG535
FP1943
pilot flame
Thermocouple
Thermopile
FP1943
Figure 37 -
Typical Pilot Flame