Operating instructions

83D0511
ILDV20/30/40 Fireplace Insert
15


Before insert is placed back into replace opening, attach intake ex pipe to intake manifold, located in rear lower left corner with hose
clamp (not supplied) or other approved method.

The exhaust manifold is shipped attached to insert. It may be removed to allow tight installation.
1. Remove glass door assembly following instructions on Page 29, Figure 33.
. Lightly tap on ange of exhaust bafe assembly towards you until disengaged. Remove bafe, manifold and gasket from unit.
Figure 9
3.  Attach the solid closed bafe plate.  Attach the slotted bafe plate. There is no adjustable bafe on the
ILDV40, however, attach the slotted bafe plate for extended vertical applications only if needed to improve ame appearance..
Figure 10
4. Feed exhaust ex through hole on top of insert and attach to manifold with hose clamp (not provided) or other approved methods
(check local codes). Insure the gasket is in place before securing the ex to the manifold.
5. Re-attach exhaust bafe and manifold assembly in reverse order of Step .
6. Re-attach glass door in reverse order.
 The ILDV30 has an adjustable bafe and may be adjusted as needed by loosening four (4) screws. Figure 11. When using
the bafe on the ILDV40 to improve ame appearance, the bafe is used in the open position only.
Figure 9 -
Remove Manifold and Attach to Flex Vent
FP1960
manifold assembly
9/08
Gasket
Manifold
Bafe
Assembly
FP1960


Flex Vent
Figure 10 -
Bafe Assembly and Adjustment

fp2156
ILDV baffle assembly
12/08
Bafe
Assembly
Bafe Plate
(For ILDV0)
FP156





 Make sure the correct bafe plate is used.
FP2640
ILDV40 baffle






FP1961
baffle adjustment
9/08
Loosen Four (4) Screws to Adjust




FP1961

 Adjust for extended vertical applications.