Operating instructions
8
42D0200
Designer Series Gas Fireplaces
For ease of installation, frame around the rebox after it has been set. Refer to chart
below for specications.
When installing into existing framed (A1) openings, loosen the junction box. Remove the rear-mounted
ue pipe adaptor. Refer to Page 16, Figures 10 and 11. Reattach both assemblies.
C
A
2
B
A
1
A1
A2
C
FP2038
designer see thru framing
10/08
2 x 4
(Minimum)
Gas
Connection
2 x 4
(Minimum)
FP2038
Figure 5 -
See-Through Framing
1/2" Drywall 5/8" Drywall
A1 44Z\v" (1124 mm) 44Z\v" (1124 mm)
A2 40B\," (1032 mm) 40B\," (1032 mm)
B 41Z\," (1045 mm) 41Z\," (1045 mm)
C 22C\v" (578 mm) 22Z\x" (572 mm)