Specifications
Warranty
6
Warranty
7
ANNUAL SERVICE /
INSPECTION RECORD STAMPS
Motorhomemodel......................
Registrationnumber ....................
Chassis number .......................
Registrationdate .......................
1stSERVICE
DATE:
DEALER’SSTAMP
We certify that an annual service has been
carried out in accordance with the handbook.
2ndSERVICE
DATE:
DEALER’SSTAMP
We certify that an annual service has been
carried out in accordance with the handbook.
3rdSERVICE
DATE:
DEALER’SSTAMP
We certify that an annual service has been
carried out in accordance with the handbook.
4thSERVICE
DATE:
DEALER’SSTAMP
We certify that an annual service has been
carried out in accordance with the handbook.
5thSERVICE
DATE:
DEALER’SSTAMP
We certify that an annual service has been
carried out in accordance with the handbook.
ANNUAL SERVICE /
INSPECTION RECORD
In order to comply with the warranty, you must
have your motorhome inspected and serviced
by an authorised Swift Group Service Centre at
least once per year.
It is important that the owner’s handbook
is stamped on the appropriate page by the
authorised Swift Group Service Centre.
Failure to do this will invalidate the warranty
and the transfer of the warranty on the change
of ownership.
The inspection should take approximately two
hours and will cover the areas dealt with in the
annual service check list. Any areas requiring
service and/or maintenance will be highlighted
by your dealer and we recommend that you
authorise any necessary work to be carried out.
NB.Itisessential,tovalidatethewarranty,
that an annual inspection be carried out by an
authorised Swift Group Service Centre covering
the items listed.
Just as the engine/gearbox/roadwheels need
regular servicing by your chassis dealer,
so there are components in your conversion
that need regular maintenance by your
motorhome dealer.
These include the gas and electrical systems
and the seals in the bodywork. Your dealer
will complete the record in this handbook to
show that the work has been carried out.
1. Damp and lamination test.
2. Chassis and chassis to body security.
3. Corner steadies.
4. Motorhomestep.
5. Roadlights,wiringandreectors.
6. Internallightsand12VDCsystem.
7. Waterheater-gasand230VAC.
8. Hob, grill and oven.
9. Refrigerator230VAC,12VDCandgas.
10. Gas system.
11. Water pump, taps and water system.
12.Mains230VACsystem.
13. Windows and fittings.
14.Rooflights.
15. Furniture hinges/stays etc.
16. Exterior locks and hinges.
17. All internal vents.
18. Seals.
19.Blindsandyscreens.
20.Blownairheatingandgasresystems.