# INSTALLATION CONDITION l 1.Refer to the {Standard Part List) when unpacking , check all parts available . 2.Do not disassemble mixer body by yourself. 3.Connect inlet hoses to supply valves. 4. Make sure inlet pipes and supply valves have been installed and cleaned, also ensure no impurities in pipeline. 5.After installation , check all joints for leakages. snuggest don't fit the faucet in the severely corrosive environments.
& Model:6647 Or Ceiling Shower arm PRODUCT LIST , 22 Model: 6663 Ne. Part name Qty No.
+ INSTALLATION SHOWER SET SIZE & WATER PIPE LINE REFERENCE Over Head shower il Unit: riot water int a oo Flasher refer to above for height he dimensions of shower installation. SET LIST III 4 INSTALLATION DEPTH OF SHOWER ARM &SHOWER HOLDER USA Can Europe: G12 t Shower head USA: 3/2714 NPT Can aria: #214 NFT = Europe: G1/2 Main body | USA. 1727-14 NPT Canada.
+ INSTALLATION DEPTH OF MAIN BODY Unit: mm Tile wall This part can be cut, so sort worry about te prominent edge after sealing the wall. = 1 Hole size 1 5 4.72778.88" 120°176mm 3 82 (92mm)max 40 Including the thicken: 5 of ceramic tie is fess than or equal fo the thickness of naive 3.62% 92mm), 50 the thickness of tle must be calculated before installation, 2: installation Main body depth not less than 3.14" (20mm min and not mare than $.62° (32mm) Max, Otherwise, the panel cannot be installed.
+ MAIN BODY CONNECTING PIPE SCHEMATIC GRAHAM + Mixed water outlast pipe Hot water © Cold warier inlet pipe inlet pipe 1.As shown in the figure, the inlet and outlet pipes are per-buried, pay attention to the correct direction of installing the per-buried box,and make sure that the mark TOP on the top of the installation box is facing upward. 2.
# INSTALLATION OF RAIN SHOWER HEAD & SHOWER ARM Female trend elbow Connect top soulless (la shower arm With proper firings. To prevent damage, to finish on shower arm, insert wall end of shower arm into shower flans (3 before screwing arm into riser connection Thread showerproof i onto shower arm. Apply tape 10 pipe threads on both ends. Do not over tighten shower head. The shower head is 360 swivel connection Tamale highroad folio Cons top outlet Go shower arm With proper firings.
+ CARE AND MAINTENANCE In order to keep the mixer surface bright | please clean the mixer regularly. Rinse faucet with clean water and wipe with soft cotton cloth. Avoid suing cleaning powder , harsh cleaning chemicals, brushes. and cloth with coarse surface to prevent scratching and corrosion. Do not use acid cleaner to clean the faucet as it may cause surface corrosion of the faucet. If the faucet comes into contact with harmful acid substances, please rinse it with water immediately.
