+ INSTALLATION CONDITION \ 1.Refer to the {Standard Part List) when unpacking, check all parts available . 2.Do not disassemble mixer body by yourself. 3.Connect inlet hoses to supply valves. 4.Make sure inlet pipes and supply valves have been installed and cleaned, also ensure no impurities in pipeline. 5. After installation , check all joints for leakages. snuggest don't fit the faucet in the severely corrosive environments.
+ MODEL:6025 i "Gr Gatling Shower arm PRODUCT LIST : 7 No. Part name Qty No.
# INSTALLATION SHOWER SET SIZE & WATER PIPE LINE REFERENCE Step 1 Over Head shower Unit chumming 14-1 5mm) my Hes stones Finish surface Please refer to above for height dimensions of shower installation TIFF TTEITZFITI777 Step 2 Over Head shower Unit: chumming 435M6"51 3/16" (1130-3300mm} Please refer to above for height dimensions of shower installation.
+ INSTALLATION DEPTH OF MAIN BODY Imminent affect 178° Fat wat elt uss wie soon seo size 1: Including the thickness of ceramic He is less than or aqua 1o the thickness of valved 30 the thickness of tle must be dialectical before installation. 2: installation Main body depth not ess then 2 1615 "(jasmine and not more than 3 17/32" (90mm) Miss, Otherwise, the panel cannot be installed 3 The oie sis of the main body after finding is smaller than the size of te pans.
& INSTALLATION DEPTH OF SHOWER ARM SHOWER HOLDER & BODY JET Tia wad 1 om i320 Fae of pasteboard should be flush with finish wall ding 8mm 19732% 1 USA: 12°14 WPT Canada: 112-44 NPT Europe: G12” USA. 1727-18 RPT Gangsta: 12°14 NPT { Europe: gai USA A814 NET =: Cora: 17°14 NET Europe.
+ MAIN BODY CONNECTING PIPE SCHEMATIC DIAGRAM A Warmongering install hot water and cold water inlet strictly es instructions. Rag enough Teflon tape, otherwise H will leak, ree st ts v0 USA: 12714 NPT Canada: 172-14 NPT Hol water pipe 1.As shown in the figure, the inlet and outlet pipes are per-buried, pay attention to the correct direction of installing the per-buried main body. downstairs the hot and cold water nit pipes, Shower head and hand shower holder body jet pigs.
+ USAGE INSTRUCTION 1.0pen the water valve. check if there is any leakage. 2 Turn the handle Upwards, water valve is opened And the muting angle can control water outflow rate, Then tha user can turn it to left or right to control the water temperature, Herein the lefts hot water, the right is cold water. 3.The swish valve can with the water putative from shower head and Body jet and shower hand.
» INSTALLATION OF RAIN SHOWER HEADS SHOWER ARM Eel ay Connect top outlet (to shower arm (3 wile proper fittings. To prevent damage, to finish on shower arm, insert wall end of shower arm inch shower (ange@iGusfare screwing am info fires connection. Threat shareware @ 00th shower arm. Apply tape to pipe threads an both ends. Do nat over tighten hotheaded. The shower head is 360 swivel connection. Female thread slaw Connect lop outlet © to shower am I) with proper flings.
+ CARE AND MAINTENANCE in order to keep the mixer surface bright, please clean the mixer regularly. Rinse faucet with clean water and wipe with soft cotton cloth. Avoid suing cleaning powder , harsh cleaning chemicals, brushes and cloth with coarse surface to prevent scratching and corrosion. Do not use acid cleaner to clean the faucet as it may cause surface corrosion of the faucet. if the faucet comes into contact with harmful acid substances, please rinse it with water immediately.
