Use and Care Manual

Table Of Contents

Water testing and sealing testing

Head Shower

Hand shower

Hot

Cold

1.After the pipe connection is completed, open the protective panel and cover,

and then open the cartridge, ﬂush the pipeline; then close the cartridae to check

the pressure resistance and sealing performance of the pipeline, make sure

there are no leakage.

2. Block each outlet pipe with a stopper then open the cartridge to check if the

pipe joint is well-sealed and the pipe condition under pressure to ensure no

leakage

Testing Purpose: Flush the impurities and sludge in the pipeline to avoid

clogging and aﬀect the eﬄuent functions.