User guide

EN US/CA Version 1.0©2013 MonaVie LLC
19
2. Join a Quick Scan event
Once a Quick Scan event has been created by you
or another distributor that has paid for the Quick Scan
feature, you may join that event and begin scanning
potential customers into the system even if you haven’t
bought the quick scans yourself. To enter into an event:
a) Select “Join Quick Scan Event” option.
b) Enter the distributor ID of the person that created the
event and the event name and press “Join Event” on
the right hand side. If you created the event, enter the
event name and press “Join My Event” on the left hand
side.
d) Next, select whether the person you are about to
scan is a distributor or not.
e) Have the person you are scanning place their nger
in the scanner. Please note that it is important to use
the same nger on subsequent scans in order to ensure
an accurate assessment of the person’s antioxidant
levels. Placing a person’s nger in the scanner is
accomplished by raising the clamp and having the
person place their index nger of their right hand into
the scanning portal and onto the lens. Make sure that
the cradle ts comfortably and smoothly around the
edge of the ngertip so that the nger covers the lens
completely and no light is escaping from around the
edge of the nger tip.
f) Click on the Start Scan button. A typical Quick Scan
takes less than ten seconds to complete
g) Repeat for additional people you wish to scan.
3. Using more than one scanner in an event
Once a distributor creates an event, other distributors
that have scanners may join that event. This is very
useful for large events where many people need to be
scanned quickly. Only the person that creates the event
needs to have paid for the Quick Scan feature. There
is no limit to the number of scanners that may be used
in a single event. Each distributor that joins the event
must use the distributor ID of the event creator and
unique event name they created for the event. Again,
an event must be created no more than 24 hours prior
to the actual event.
How to Set Up a Quick Scan Event CONTINUED
b
d
*Images in this guide represent general functions of the VIEW software app. Screen shots may vary depending on your device.
e
Lens
Clamp