User guide

Once the scanner and MonaVie VIEW app have been

successfully paired using Bluetooth, you must link the

scanner to the MonaVie VIEW app before you can

begin scanning. To do this, open the MonaVie VIEW

app:

a) Open or launch the MonaVie VIEW application.

b) Select the OK button when you are prompted with

the message dialog “The VIEW. Would you like to Use

Your current Location. OK or Don’t Allow.”

c) Enter your MonaVie Distributor ID and MonaVie

Password

d) Click Continue

The app authenticates your distributor id and password

against your assigned scanner and, if successful, will

display all your available options.

Allowing Location Services

The app requires you to enable location services. This

allows the software to provide accurate information,

units of measurements, and other security features

based on the location where you are scanning.

Location Services also ensure that the scanner is

being used in compliance with international rules

and regulations. On the MonaVie VIEW Antioxidant

Scanner website, you can see a map showing all the

MonaVie scans currently taking place by clicking on

the GPS Map tab at the top of the page.

Syncing Data

With your scanner and mobile device properly paired

and linked, the scanning data will automatically sync

between the unit and mobile device as long as both

are turned on and within proximity of each other.

Linking Your Scanner to the VIEW App

*Images in this guide represent general functions of the VIEW software app. Screen shots may vary depending on your device.