User manual

LC7TT novo
6
Facts
Technical data power adaptor
Input voltage: 100-240 V AC; 50-60 Hz; 1.4-0.7 A
Output voltage: 12 V DC; 5.0 A; 60 W max.
Polarity: + in the middle, see Fig: Polarity.
Art. No: 9311-9311-1
Technical details
Length 1405-1630 mm
Width 640 mm
Height
(max at display) LC7TT novo 1265 mm
Height
(max at saddle) 1240 mm
Weight 77 kg
Weight flywheel 20 kg
Max user weight 180 kg
Painting Industrial powder coating
Rust protection Basic powder coating on
exposed areas
Power output
Continuous (50-100 rpm) 4-700 W
Peak (at RPM) 1400 W (200 RPM)
Smallest increment 1 W
Features (in PC software)
• VO
2
submax test
• Training/test protocols (custom)
• VO
2
max test
• VO
2
controlled
Features (external equipment)
• ECG work test
• Equipment for testing of oxygen uptake
• Other Ergoline compatible device
External control is via RS232 and USB-B. Data
outputs can be used simultaneously, in parallel with
each other
Included
• Calibration weight 4 kg
• Chest belt Polar H7, Bluetooth SMART
• Tool kit
• Power adaptor
• 0-modem cable (RS232)
• USB A-B cable
• USB - RS232 adaptor
Product Information
NOTE!
Use of the product may involve considerable physical
stress. It is therefore recommended that people who
are not accustomed to cardiovascular exercise or
who do not feel completely healthy, should consult
a physician for advice.
Serial number
The serial number is placed according to Fig:
Overview at page 8.
The bike can be used at maximum load
without any time limit.
PC software
PC software to control the bike can be downloaded
free from our website: www.monarkexercise.se.
NOTE!
If you replace the original power adaptor, the
replacement must be CE marked or equivalent. It
must also have the correct polarity and voltage, and
have a capacity of at least 90 W.
Fig: Polarity
Pulse registration
The bike has a module that registers the heart rate
data from heart rate belts, or similar, with ANT+
or Bluetooth SMART profile. We recommend, for
example, "Polar H7", which we have tested and that
works well.