Specifications

Monark 871 E
7
Computer specifications
Display
RPM 0 - 250 rev./min
TOTAL COUNT 9999 rev. total
TIME 0:00-99:59 min:sec
Batteries: 1.5 V x 2, R6 (AA)
Storing temperature: -10ºC - +60ºC
Operating temperature: 0ºC - 50ºC
KEYS AND FUNCTIONS
MODE key
Use the MODE key to cycle through the functions.
SET key
Pressing this key will make it possible to set TIME
and TOTAL COUNT. If you hold down this key for
two seconds you can advance the function value at a
faster rate.
Programming TIME:
Press MODE key to advance to TIME function, and
use SET to enter your desired time. Each press of SET
will advance time by one minute. When pedalling is
started, measurement of remaining exercise time will
begin and the unit will count down to 0 at which time
beeper will sound for 5 seconds.
Programming TOTAL COUNT:
Press MODE key to advance to TOTAL COUNT
function, and use SET to enter your desired value.
Each press of SET will advance value by 10. When
pedalling is started, measurement of remaining revo-
lutions will begin and the unit will count down to 0 at
which time beeper will sound for five seconds.
RESET key
The RESET key will clear the values for TIME and
TOTAL COUNT individually.
NOTE:
The display will return to normal when no key is 1.
pressed for five seconds, or trainer is not used.
The computer starts automatically when one of 2.
the keys is pressed, or when the trainer is used and
meter gets rpm indication.
Auto shut off function when not pressed any key 3.
or device not used for four minutes.
Do not expose the fitness computer to direct sunlight
or extremely high temperature. Do not use any dis-
solvents when cleaning. Use only dry cloth.