Specifications

2
3
1
Fig. 8
Fig. 11. Leg exercise in a lying position at the same level as the ergometer
Monark 881 E
6
Operating Instruction
Workload device
Monark Rehab Trainer model 881 E is an arm and
leg ergometer provided with a brake belt. The power
can be read in watts at 50 pedal rpm moreover, the
work can be read in kilo pond metres (kpm). The Re-
hab Trainer is also equipped with an electronic me-
ter, showing pedal revolutions per minute (RPM), the
total pedal revolutions (TOTAL COUNT) and time
(TIME) function.
Through cycling supplies the test person kinetic ener-
gy to the flywheel. This is braked by means of a brake
belt which runs around the bigger part of the brake
surface of the flywheel. The workload is changed ei-
ther by using another pedalling speed or by increasing
or decreasing the tension of the brake belt against the
flywheel by means of the work load control knob.
Fig: Workload device
1) Electronic meter
2) Graduated scale
3) Control knob for adjustment of work load
Arm exercise in a sitting position with
the ergometer placed on a table.
Leg exercise in a lying position at the same level
as the ergometer.
Leg exercise in a sitting position with the
ergometer placed on the floor.
Arm exercise with the ergometer
hanging on the wall bars.
Ergometer placed on a
table for wall bars.